Therefore, we regularly check 70-410 Exam Reference exam to find whether has update or not. Once the update comes out, we will inform our customers who are using our products so that they can have a latest understanding of 70-410 Exam Reference exam. All the update service is free during one year after you purchased our 70-410 Exam Reference exam software. We always lay great emphasis on the quality of our 70-410 Exam Reference study guide. Never have we been complained by our customers in the past ten years. 70-410 Exam Reference exam simulation software developed by us are filled with the latest and comprehensive questions.
Windows Server 2012 70-410 It is up to you to make a decision.
But our IT elite of Omgzlook and our customers who are satisfied with our 70-410 - Installing and Configuring Windows Server 2012 Exam Reference exam software give us the confidence to make such promise. I have confidence in our Omgzlook products that soon Omgzlook's exam questions and answers about Microsoft Exam 70-410 Book will be your choice and you will pass Microsoft certification Exam 70-410 Book exam successfully. It is wise to choose our Omgzlook and Omgzlook will prove to be the most satisfied product you want.
If you worry about your exam, our 70-410 Exam Reference exam training dumps will guide you and make you well preparing，you will pass exam without any doubt. How to find a valid exam dumps providers which can elaborate on how to prepare you properly with more appropriate questions to pass 70-410 Exam Reference exams? Yes, here is your chance to know us. Our products are just suitable for you.
Microsoft 70-410 Exam Reference - Omgzlook will achieve your dream.
It doesn’t matter if it's your first time to attend 70-410 Exam Reference practice test or if you are freshman in the IT certification test, our latest 70-410 Exam Reference dumps guide will boost you confidence to face the challenge. Our dumps collection will save you much time and ensure you get high mark in 70-410 Exam Reference actual test with less effort. Come and check the free demo in our website you won’t regret it.
Omgzlook Microsoft 70-410 Exam Reference exam questions and answers provide you test preparation information with everything you need. About Microsoft 70-410 Exam Reference exam, you can find these questions from different web sites or books, but the key is logical and connected.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains one Active Directory forest named contoso.com. The forest contains a single domain.
AH domain controllers run Windows Server 2012 R2.
The domain contains an organizational unit (OU) named TemporaryUsers that only contains 50 users accounts for temporary employees. The users are members of a global group named TempUsers.
The TemporaryUsers OU is configured as shown in the exhibit. (Click the Exhibit button.)
You need to delete all of the user accounts of the temporary employees
What Windows PowerShell command should you run? to answer, select the appropriate options in the answer area.
Answer:
Explanation
Remove-AdGroup -identity 'OU=temporaryUsers,dc=contoso.dc"com"-recursive
QUESTION NO: 2
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain.
The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to ensure that User1 can manage the group membership of Group1. The solution must minimize the number of permissions assigned to User1.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: G
Explanation
The Set-ADGroup cmdlet modifies the properties of an Active Directory group. You can modify commonly used property values by using the cmdlet parameters. For example, the -ManagedBy parameter allows you to specify a user or group of users who can manage the specified AD group.
QUESTION NO: 3
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. You have been instructed to make sure that a server, named ENSUREPASS-SR07, is configured to be managed remotely from ENSUREPASS-SR01 using Server Manager.
Which of the following is not a valid option to take? (Choose all that apply.)
A. You could access the server manager on ENSUREPASS-SR07.
B. You could access the server manager on ENSUREPASS-SR13.
C. You could run the %windir%\system32\Configure-SMRemoting.exe from an elevated command prompt on ENSUREPASS-SR13.
D. You could run the Configure-SMRemoting.exe - enable cmdlet on ENSUREPASS-SR07.
Answer: B C
QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
QUESTION NO: 5
Your network contains a server named Server1 that runs Windows Server 2012 R2. App1 has the Print and Document Services server role installed.
All client computers run Windows 8.
The network contains a network-attached print device named Printer1.
From App1, you share Printer1.
You need to ensure that users who have connected to Printer1 previously can print to Printer1 if
App1 fails.
What should you configure? To answer, select the appropriate option in the answer area.
Answer:
Explanation
Enabling Branch Office Direct Printing is a new feature in Windows Server 2012 R2 that helps branch- office sites reduce their wide area network (WAN) usage by printing directly to a print device instead of spooling print jobs to a print queue on the print server.
Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. It is enabled by an administrator using the Print Management
Console or Windows PowerShell on the server.
The printer information is cached in the branch office, so that if the print server is unavailable for some reason (for example if the WAN link to the data center is down), then it is still possible for the user to print.
Branch Office Direct Printing requires the following operating systems:
Windows Server 2012
Windows 8
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 9: Print and Document
Services, Lesson 1: Deploying and managing print servers, p. 443
http://technet.microsoft.com/en-us/library/jj134156
http://technet.microsoft.com/en-us/library/jj134152.a
We guarantee full refund for any reason in case of your failure of Salesforce Energy-and-Utilities-Cloud test. The Microsoft SAP C_THR81_2405 certification exam is not only validate your skills but also prove your expertise. Before you choose our Splunk SPLK-5002 study material, you can try our Splunk SPLK-5002 free demo for assessment. If you want to get a good improvement in your career, The method that using the Omgzlook’s Microsoft Amazon ANS-C01 exam training materials to obtain a certificate is very feasible. Just only dozens of money on Salesforce B2C-Commerce-Developer latest study guide will assist you 100% pass exam and 24-hours worm aid service.
Updated: May 28, 2022