Time and tide wait for no man, if you want to save time, please try to use our 70-410 Exam Practice preparation exam, it will cherish every minute of you and it will help you to create your life value. With the high pass rate of our 70-410 Exam Practice exam questions as 98% to 100% which is unbeatable in the market, we are proud to say that we have helped tens of thousands of our customers achieve their dreams and got their 70-410 Exam Practice certifications. Join us and you will be one of them. You also can refer to other candidates’ review guidance, which might give you some help. Then we can offer you a variety of learning styles. To be convenient for the learners, our 70-410 Exam Practice certification questions provide the test practice software to help the learners check their learning results at any time.
Windows Server 2012 70-410 It is quite convenient.
Windows Server 2012 70-410 Exam Practice - Installing and Configuring Windows Server 2012 No extra reference books are needed. If you are better, you will have a more relaxed life. 70-410 Valid Study Guide Book guide materials allow you to increase the efficiency of your work.
our 70-410 Exam Practice study materials will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our 70-410 Exam Practice study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our 70-410 Exam Practice study materials better.
Microsoft 70-410 Exam Practice - Then join our preparation kit.
70-410 Exam Practice exam materials provide you the best learning prospects, by employing minimum exertions through the results are satisfyingly surprising, beyond your expectations. Despite the intricate nominal concepts, 70-410 Exam Practice exam dumps questions have been streamlined to the level of average candidates, pretense no obstacles in accepting the various ideas. The combination of 70-410 Exam Practice Exam practice software and PDF Questions and Answers make the preparation easier and increase the chances to get higher score in the 70-410 Exam Practice exam.
What most useful is that PDF format of our 70-410 Exam Practice exam materials can be printed easily, you can learn it everywhere and every time you like. It is really convenient for candidates who are busy to prepare the exam.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains
100 servers.
The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must ensure that
Group1 is added only to the servers.
What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers
OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation
A. This would add the group to the wrong OU
B. This would affect the whole domain and would effect member of the group
C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
D. Restricted Groups defines what member or groups should exist as part of a group Why use Group
Policy preferences?
Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy,
Group Policy preferences only App1y to Active Directory policy.
You use preferences to configure many areas of the OS, including:
System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer VPN and dial-up networking connections Printer configuration and mapping
Registry settings, schedule tasks and system services Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management Start Menu properties and menu items
QUESTION NO: 2
You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 R2.
IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6.
The IPv6 routing on Server1 is shown in the following table.
You verify that Server2 can ping the IPv6 address of DC1.
You need to ensure that Server1 can ping the IPv6 address of DC1.
What command should you run on Server1? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation
Before a routing table is used, the destination cache is checked for an entry matching the destination address in the packet being forwarded. If the destination cache does not contain an entry for the destination address, the routing table is used to determine:
The next-hop address - For a direct delivery (in which the destination is on a local link), the next-hop address is the destination address in the packet. For an indirect delivery (in which the destination is not on a local link), the next-hop address is the address of a router.
The next-hop interface - The interface identifies the physical or logical interface that is used to forward the packet either to its destination or to the next router.
Reference: http://technet.microsoft.com/en-us/library/dd379520%28v=WS.10%29.aspx
QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 4
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
QUESTION NO: 5
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
Omgzlook is the best platform, which offers braindumps for CompTIA 220-1102 Certification exam duly prepared by experts. Perhaps you still cannot believe in our SAP C_S4CPR_2402 study materials. Juniper JN0-1103 - The use of test preparation exam questions helps them to practice thoroughly. The calculation system of our OCEG GRCA real exam will start to work and finish grading your practices. Moreover if you are not willing to continue our Microsoft AZ-700 test braindumps service, we would delete all your information instantly without doubt.
Updated: May 28, 2022