During your use of our RH-202 Test learning materials, we also provide you with 24 hours of free online services. Whenever you encounter any RH-202 Test problems in the learning process, you can email us and we will help you to solve them immediately. And you will find that our service can give you not only the most professional advice on RH-202 Test exam questions, but also the most accurate data on the updates. Our RH-202 Test exam questions are designed from the customer's perspective, and experts that we employed will update our RH-202 Test learning materials according to changing trends to ensure the high quality of the RH-202 Test practice materials. What are you still waiting for? Choosing our RH-202 Test guide questions and work for getting the certificate, you will make your life more colorful and successful. We know that time is very precious to everyone, especially the test takers to study our RH-202 Test exam questions.
Red Hat Certification RH-202 Why not have a try?
Red Hat Certification RH-202 Test - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) The experts will update the system every day. With our Accurate RH-202 Prep Material exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform.
Although the three major versions of our RH-202 Test exam dumps provide a demo of the same content for all customers, they will meet different unique requirements from a variety of users based on specific functionality. The most important feature of the online version of our RH-202 Test learning materials are practicality. The online version is open to all electronic devices, which will allow your device to have common browser functionality so that you can open our products.
RedHat RH-202 Test - You must make a decision as soon as possible!
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our RH-202 Test preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our RH-202 Test study materials for those who need to improve themselves quickly in a short time to pass the exam to get the RH-202 Test certification.
Our reputation is earned by high-quality of our learning materials. Once you choose our training materials, you chose hope.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab /dev/hda? swap swap defaults 0 0
QUESTION NO: 2
free -m Verify Either Swap is enabled or not.
QUESTION NO: 3
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 4
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 5
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
The questions and answers of our Esri EJSA_2024 exam questions are refined and have simplified the most important information so as to let the clients use little time to learn. Cisco 300-740 - We just want to provide you with the best service. So our study materials are helpful to your preparation of the Splunk SPLK-2003 exam. EMC D-VXR-DS-00 - So we have advandages not only on the content but also on the displays. But our SAP C_ARSOR_2404 study guide will offer you the most professional guidance.
Updated: May 27, 2022