We believe you will like our dumps that have helped more candidates pass RH-202 Test exam after you have tried it. Using our exam dump, you can easily become IT elite with RH-202 Test exam certification. Your personal experience will defeat all advertisements that we post before. The test software used in our products is a perfect match for Windows' RH-202 Test learning material, which enables you to enjoy the best learning style on your computer. Our RH-202 Test certification guide also use the latest science and technology to meet the new requirements of authoritative research material network learning. It is very normal to be afraid of the exam , especially such difficult exam like RH-202 Test exam.
Now, quickly download RH-202 Test free demo for try.
You will find the exam is a piece of cake with the help of our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Test study materials. New RH-202 Exam Sample test engine can simulate the actual test during the preparation and record the wrong questions for our reviewing. You just need 20-30 hours for preparation and feel confident to face the New RH-202 Exam Sample actual test.
And if you want to get all benefits like that, our RH-202 Test training quiz is your rudimentary steps to begin. So it is undisputed that you can be prepared to get striking outcomes if you choose our RH-202 Test study materials. And so many of our loyal customers have achieved their dreams with the help of our RH-202 Test exam questions.
RedHat RH-202 Test - You must use it before the deadline day.
Our RH-202 Test exam braindumps are famous for its advantage of high efficiency and good quality which are carefully complied by the professionals. Our excellent professionals are furnishing exam candidates with highly effective RH-202 Test study materials, you can even get the desirable outcomes within one week. By concluding quintessential points into RH-202 Test actual exam, you can pass the exam with the least time while huge progress.
Convenience of the online version of our RH-202 Test study materials is mainly reflected in the following aspects: on the one hand, the online version is not limited to any equipment. You are going to find the online version of our RH-202 Test exam prep applies to all electronic equipment, including telephone, computer and so on.
RH-202 PDF DEMO:
QUESTION NO: 1
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 4
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 5
free -m Verify Either Swap is enabled or not.
Come and buy our Microsoft AZ-700 study guide, you will be benefited from it. We are dedicated to your accomplishment, hence pledges you victory in OCEG GRCA exam in a single attempt. More than 99% students who use our Splunk SPLK-5001 exam material passed the exam and successfully obtained the relating certificate. It will allow you to assess your skills and you will be able to get a clear idea of your preparation for the real RedHat Dell D-PVMD24-DY-A-00 exam. Microsoft MB-800 - Therefore, our study materials specifically introduce a mock examination function.
Updated: May 27, 2022