If you are an IT staff, it will be your indispensable training materials. Do not take your future betting on tomorrow. Omgzlook's RedHat RH-202 Free exam training materials are absolutely trustworthy. The system of RH-202 Free test guide will keep track of your learning progress in the whole course. Therefore, you can have 100% confidence in our RH-202 Free exam guide. Then, you need to upgrade and develop yourself.
Red Hat Certification RH-202 The talent is everywhere in modern society.
Due to the shortage of useful practice materials or being scanty for them, many candidates may choose the bad quality exam materials, but more and more candidates can choose our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Free study materials. All questions that may appear in the exam are included in our exam dumps. With the changes of exam outline, we also update our exam dumps at any time.
The most important part is that all contents were being sifted with diligent attention. No errors or mistakes will be found within our RH-202 Free study guide. If you are curious or doubtful about the proficiency of our RH-202 Free preparation quiz, we can explain the painstakingly word we did behind the light.
RedHat RH-202 Free - Then you will be confident in the actual test.
Our RH-202 Free training quiz will be your best teacher who helps you to find the key and difficulty of the exam, so that you no longer feel confused when review. Our RH-202 Free study materials will be your best learning partner and will accompany you through every day of the review. Our RH-202 Free exam quiz will help you to deal with all the difficulties you have encountered in the learning process and make you walk more easily and happily on the road of studying.
The secret of success is constancy to purpose. If your purpose is passing exams and getting a certification.
RH-202 PDF DEMO:
QUESTION NO: 1
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 2
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 3
Either Reboot or use partprobe command.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
Press w to write on partitions table.
EMC D-MN-OE-23 - Our study materials will help you get the according certification you want to have. The IBM C1000-180 real questions are written and approved by our It experts, and tested by our senior professionals with many years' experience. The SAP C_THR87_2405 study braindumps are compiled by our frofessional experts who have been in this career fo r over ten years. Huawei H19-338_V3.0 - Besides, you can rest assured to enjoy the secure shopping for RedHat exam dumps on our site, and your personal information will be protected by our policy. IBM C1000-180 - Our customer service is 24 hours online and will answer your questions in the shortest possible time.
Updated: May 27, 2022