The most notable feature of our RH-202 Braindumps learning quiz is that they provide you with the most practical solutions to help you learn the exam points of effortlessly and easily, then mastering the core information of the certification course outline. Their quality of our RH-202 Braindumps study guide is much higher than the quality of any other materials, and questions and answers of RH-202 Braindumps training materials contain information from the best available sources. Therefore, the RH-202 Braindumps prepare guide’ focus is to reform the rigid and useless memory mode by changing the way in which the RH-202 Braindumps exams are prepared. RH-202 Braindumps practice materials combine knowledge with the latest technology to greatly stimulate your learning power. We will also protect your personal privacy sufficiently.
Red Hat Certification RH-202 It absolutely has no problem.
Red Hat Certification RH-202 Braindumps - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Why is that? The answer is that you get the certificate. Also the useful small buttons can give you a lot of help on our RH-202 Exam Question study guide. Some buttons are used for hide or display answers.
Secondly, the price of the RH-202 Braindumps study materials is favourable. Our content and design of the RH-202 Braindumps exam questions have laid a good reputation for us. Our users are willing to volunteer for us.
RedHat RH-202 Braindumps - We will never neglect any user.
Our company is open-handed to offer benefits at intervals, with RH-202 Braindumps learning questions priced with reasonable prices. Almost all kinds of working staffs can afford our price, even the students. And we will give some discounts from time to time. Although our RH-202 Braindumps practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the RH-202 Braindumps exam.
After your payment is successful, we will send you an email within 5 to 10 minutes. As long as you click on the link, you can use RH-202 Braindumps learning materials to learn.
RH-202 PDF DEMO:
QUESTION NO: 1
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 2
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 3
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 4
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 5
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
Juniper JN0-223 - They are unsuspecting experts who you can count on. HP HPE6-A72 - In the era of information explosion, people are more longing for knowledge, which bring up people with ability by changing their thirst for knowledge into initiative and "want me to learn" into "I want to learn". So Avaya 71402X exam dumps are definitely valuable acquisitions. Huawei H12-811_V1.0 - Don't hesitate! Fortinet FCSS_SOC_AN-7.4 - And we are the leading practice materials in this dynamic market.
Updated: May 27, 2022