So are our RH-202 Braindumps exam braindumps! Not only we provide the most effective RH-202 Braindumps study guide, but also we offer 24 hours online service to give our worthy customers RH-202 Braindumps guides and suggestions. Your time will be largely saved for our workers know about our RH-202 Braindumps practice materials better. Also, we have our own research center and experts team. So our products can quickly meet the new demands of customers. There are so many advantages of our RH-202 Braindumps actual exam, and you are welcome to have a try!
Red Hat Certification RH-202 Or you can choose to free update your exam dumps.
Red Hat Certification RH-202 Braindumps - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Being considered the most authentic brand in this career, our professional experts are making unremitting efforts to provide our customers the latest and valid {CertName} exam simulation. You will find some exam techniques about how to pass Exam RH-202 Cost exam from the exam materials and question-answer analysis provided by our Omgzlook. Besides, to make you be rest assured of our dumps, we provide Exam RH-202 Cost exam demo for you to free download.
But we can help all of these candidates on RH-202 Braindumps study questions. Numerous grateful feedbacks form our loyal customers proved that we are the most popular vendor in this field to offer our RH-202 Braindumps preparation questions. You can totally relay on us.
RedHat RH-202 Braindumps - So they are dependable.
How you can gain the RH-202 Braindumps certification with ease in the least time? The answer is our RH-202 Braindumps study materials for we have engaged in this field for over ten years and we have become the professional standard over all the exam materials. You can free download the demos which are part of our RH-202 Braindumps exam braindumps, you will find that how good they are for our professionals devote of themselves on compiling and updating the most accurate content of our RH-202 Braindumps exam questions.
Our experts have experience of the exam for over ten years. So our RH-202 Braindumps practice materials are their masterpiece full of professional knowledge and sophistication to cope with the RH-202 Braindumps exam.
RH-202 PDF DEMO:
QUESTION NO: 1
free -m Verify Either Swap is enabled or not.
QUESTION NO: 2
vi /etc/fstab /dev/hda? swap swap defaults 0 0
QUESTION NO: 3
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 4
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 5
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
EMC D-AV-DY-23 - The clients can understand the detailed information about our products by visiting the pages of our products on our company’s website. As long as you study with ourFortinet NSE6_FNC-7.2 learning guide, you will be sure to get your dreaming certification. Our EMC D-MN-OE-23 practice engine can offer you the most professional guidance, which is helpful for your gaining the certificate. If you are not fortune enough to acquire the Cisco 700-240 certification at once, you can unlimitedly use our product at different discounts until you reach your goal and let your dream comes true. If you try on it, you will find that the operation systems of the EMC D-MN-OE-23 exam questions we design have strong compatibility.
Updated: May 27, 2022