It is more convenient for you to look and read while protect our eye. If you print the 70-410 Updates exam materials out, you are easy to carry it with you when you out, it is to say that will be a most right decision to choose the 70-410 Updates, you will never regret it. We can find that the Internet is getting closer and closer to our daily life and daily work. Because you just need to spend twenty to thirty hours on the practice exam, our 70-410 Updates study materials will help you learn about all knowledge, you will successfully pass the 70-410 Updates exam and get your certificate. So if you think time is very important for you, please try to use our 70-410 Updates study materials, it will help you save your time. Our 70-410 Updates materials provide you with the best learning prospects and give you more than you expect by adopting minimal effort.
Come and buy our 70-410 Updates exam questions!
However, how to pass Microsoft certification 70-410 - Installing and Configuring Windows Server 2012 Updates exam quickly and simply? Our Omgzlook can always help you solve this problem quickly. And after using our Pass4Sure 70-410 Study Materials learning prep, they all have marked change in personal capacity to deal with the Pass4Sure 70-410 Study Materials exam intellectually. The world is full of chicanery, but we are honest and professional in this area over ten years.
Through so many feedbacks of these products, our Omgzlook products prove to be trusted. Omgzlook have the latest Microsoft certification 70-410 Updates exam training materials. The industrious Omgzlook's IT experts through their own expertise and experience continuously produce the latest Microsoft 70-410 Updates training materials to facilitate IT professionals to pass the Microsoft certification 70-410 Updates exam.
Microsoft 70-410 Updates - Pass guaranteed; 5.
Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our 70-410 Updates exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our 70-410 Updates study materials. And most of all, you will get reward by our 70-410 Updates training engine in the least time with little effort.
As we sell electronic files, there is no need to ship. After payment you can receive 70-410 Updates exam review questions you purchase soon so that you can study before.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 2
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
QUESTION NO: 4
You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 R2.
IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6.
The IPv6 routing on Server1 is shown in the following table.
You verify that Server2 can ping the IPv6 address of DC1.
You need to ensure that Server1 can ping the IPv6 address of DC1.
What command should you run on Server1? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation
Before a routing table is used, the destination cache is checked for an entry matching the destination address in the packet being forwarded. If the destination cache does not contain an entry for the destination address, the routing table is used to determine:
The next-hop address - For a direct delivery (in which the destination is on a local link), the next-hop address is the destination address in the packet. For an indirect delivery (in which the destination is not on a local link), the next-hop address is the address of a router.
The next-hop interface - The interface identifies the physical or logical interface that is used to forward the packet either to its destination or to the next router.
Reference: http://technet.microsoft.com/en-us/library/dd379520%28v=WS.10%29.aspx
QUESTION NO: 5
Your network contains one Active Directory forest named contoso.com. The forest contains a single domain.
AH domain controllers run Windows Server 2012 R2.
The domain contains an organizational unit (OU) named TemporaryUsers that only contains 50 users accounts for temporary employees. The users are members of a global group named TempUsers.
The TemporaryUsers OU is configured as shown in the exhibit. (Click the Exhibit button.)
You need to delete all of the user accounts of the temporary employees
What Windows PowerShell command should you run? to answer, select the appropriate options in the answer area.
Answer:
Explanation
Remove-AdGroup -identity 'OU=temporaryUsers,dc=contoso.dc"com"-recursive
SAP C-S4EWM-2023 - There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. APMG-International AgileBA-Foundation - Please totally trust the accuracy of questions and answers. We have taken our customers’ suggestions of the SAP C_THR97_2405 exam prep seriously, and according to these useful suggestions, we have tried our best to perfect the SAP C_THR97_2405 reference guide from our company just in order to meet the need of these customers well. Expert for one-year free updating of SAP C_S43_2022 dumps pdf, we promise you full refund if you failed exam with our dumps. Usually, the questions of the real exam are almost the same with our VMware 2V0-33.22PSE exam questions.
Updated: May 28, 2022