Besides, the pass rate of our 70-410 Questions exam questions are unparalled high as 98% to 100%, you will get success easily with our help. There are so many features to show that our 70-410 Questions study guide surpasses others. You can have a free try for downloading our 70-410 Questions exam demo before you buy our products. However, the exam is very difficult for a lot of people. Especially if you do not choose the correct study materials and find a suitable way, it will be more difficult for you to pass the exam and get the Microsoft related certification. This is hard to find and compare with in the market.
You can ask anyone who has used 70-410 Questions actual exam.
Windows Server 2012 70-410 Questions - Installing and Configuring Windows Server 2012 This greatly improves the students' availability of fragmented time. When you want to correct the answer after you finish learning, the correct answer for our 70-410 Dump Torrent test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the 70-410 Dump Torrent exam torrent, and you can flexibly and freely choose these two modes according to your habit.
Once you choose our learning materials, your dream that you have always been eager to get Microsoft certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. We are convinced that our 70-410 Questions exam questions can help you gain the desired social status and thus embrace success.
Microsoft 70-410 Questions - Our workers have checked for many times.
Our experts are researchers who have been engaged in professional qualification 70-410 Questions exams for many years and they have a keen sense of smell in the direction of the examination. Therefore, with our 70-410 Questions study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the 70-410 Questions exam. We have free demos of the 70-410 Questions exam materials that you can try before payment.
Why not give our Microsoft study materials a chance? Our products will live up to your expectations. Our 70-410 Questions study materials are designed carefully.
70-410 PDF DEMO:
QUESTION NO: 1
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
QUESTION NO: 2
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
QUESTION NO: 3
Your network contains one Active Directory forest named contoso.com. The forest contains a single domain.
AH domain controllers run Windows Server 2012 R2.
The domain contains an organizational unit (OU) named TemporaryUsers that only contains 50 users accounts for temporary employees. The users are members of a global group named TempUsers.
The TemporaryUsers OU is configured as shown in the exhibit. (Click the Exhibit button.)
You need to delete all of the user accounts of the temporary employees
What Windows PowerShell command should you run? to answer, select the appropriate options in the answer area.
Answer:
Explanation
Remove-AdGroup -identity 'OU=temporaryUsers,dc=contoso.dc"com"-recursive
QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 5
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain.
The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to ensure that User1 can manage the group membership of Group1. The solution must minimize the number of permissions assigned to User1.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: G
Explanation
The Set-ADGroup cmdlet modifies the properties of an Active Directory group. You can modify commonly used property values by using the cmdlet parameters. For example, the -ManagedBy parameter allows you to specify a user or group of users who can manage the specified AD group.
Our service staff will help you solve the problem about the Microsoft PL-500 training materials with the most professional knowledge and enthusiasm. Fortinet NSE6_WCS-7.0 - There is a linkage given by our e-mail, and people can begin their study right away after they have registered in. First of all, if you are not sure about the Network Appliance NS0-701 exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy Network Appliance NS0-701 study guide or not. IBM C1000-137 - Omgzlook's providing learning materials can not only help you 100% pass the exam, but also provide you a free one-year update service. Our services before, during and after the clients use our Google Professional-Cloud-Network-Engineer certification material are considerate.
Updated: May 28, 2022