OmgzlookのAmazonのAWS-DevOps-Engineer-Professional試験解説試験トレーニング資料を持っていたら、試験に対する充分の準備がありますから、安心に利用したください。Omgzlookは優れたIT情報のソースを提供するサイトです。Omgzlookで、あなたの試験のためのテクニックと勉強資料を見つけることができます。 AWS-DevOps-Engineer-Professional試験解説認定試験の問題集は大勢の人の注目を集め、とても人気がある商品です。AWS-DevOps-Engineer-Professional試験解説認定試験の問題集はなぜそんなに人気がありますか？AWS-DevOps-Engineer-Professional試験解説認定試験の問題集は最も全面的なIT知識を提供できるからです。 OmgzlookはIT認定試験を受験した多くの人々を助けました。
AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional 君の初めての合格を目標にします。
OmgzlookのAmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)試験解説試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。 それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。
我々の目的はあなたにAmazonのAWS-DevOps-Engineer-Professional試験解説試験に合格することだけです。試験に失敗したら、弊社は全額で返金します。我々の誠意を信じてください。
Amazon AWS-DevOps-Engineer-Professional試験解説 - 心よりご成功を祈ります。
IT技術の急速な発展につれて、IT認証試験の問題は常に変更されています。したがって、OmgzlookのAWS-DevOps-Engineer-Professional試験解説問題集も絶えずに更新されています。それに、Omgzlookの教材を購入すれば、Omgzlookは一年間の無料アップデート・サービスを提供してあげます。問題が更新される限り、Omgzlookは直ちに最新版のAWS-DevOps-Engineer-Professional試験解説資料を送ってあげます。そうすると、あなたがいつでも最新バージョンの資料を持っていることが保証されます。Omgzlookはあなたが試験に合格するのを助けることができるだけでなく、あなたは最新の知識を学ぶのを助けることもできます。このような素晴らしい資料をぜひ見逃さないでください。
豊富な資料、便利なページ構成と購入した一年間の無料更新はあなたにAmazonのAWS-DevOps-Engineer-Professional試験解説試験に合格させる最高の支持です。あなたのIT能力が権威的に認められるのがほしいですか。
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B
QUESTION NO: 2
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
QUESTION NO: 3
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D
QUESTION NO: 4
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 5
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
OmgzlookのOracle 1z0-1127-24問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。 Pegasystems PEGAPCDC87V1 - 時々重要な試験に合格するために大量の問題をする必要があります。 OmgzlookのITエリートたちは彼らの専門的な目で、最新的なAmazonのCisco 300-630試験トレーニング資料に注目していて、うちのAmazonのCisco 300-630問題集の高い正確性を保証するのです。 ご客様はNutanix NCP-CI-AWS問題集を購入してから、勉強中で何の質問があると、行き届いたサービスを得られています。 AmazonのCisco 300-425認定試験に合格することはきっと君の職業生涯の輝い将来に大変役に立ちます。
Updated: May 28, 2022