OmgzlookのAmazonのAWS-DevOps-Engineer-Professional試験番号問題集を購入するなら、君がAmazonのAWS-DevOps-Engineer-Professional試験番号認定試験に合格する率は１００パーセントです。あなたはOmgzlookの学習教材を購入した後、私たちは一年間で無料更新サービスを提供することができます。AmazonのAWS-DevOps-Engineer-Professional試験番号認定試験に合格することはきっと君の職業生涯の輝い将来に大変役に立ちます。 この試験の認証資格を取ったら、あなたは多くの利益を得ることができます。あなたもこの試験を受ける予定があれば、OmgzlookのAWS-DevOps-Engineer-Professional試験番号問題集は試験に準備するときに欠くことができないツールです。 常々、時間とお金ばかり効果がないです。
AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional 暇の時間を利用して勉強します。
AmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)試験番号試験のために勉強していますなら、Omgzlookの提供するAmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)試験番号試験ソフトはあなたの選びの最高です。 そして、AWS-DevOps-Engineer-Professional 真実試験試験参考書の問題は本当の試験問題とだいたい同じことであるとわかります。AWS-DevOps-Engineer-Professional 真実試験試験参考書があれば,ほかの試験参考書を勉強する必要がないです。
これはあなたに安心で弊社の商品を購入させるためです。あなたはAmazonのAWS-DevOps-Engineer-Professional試験番号試験を準備しているとき、あなたの時間とお金を無駄にしないであなたに試験に一番有効な助けを提供するのは我々がAmazonのAWS-DevOps-Engineer-Professional試験番号ソフトを作成する達成したい目標です。我々のソフトは多くの受験生にAmazonのAWS-DevOps-Engineer-Professional試験番号試験に合格させました。
Amazon AWS-DevOps-Engineer-Professional試験番号 - 我々のデモを無料でやってみよう。
きみはAmazonのAWS-DevOps-Engineer-Professional試験番号認定テストに合格するためにたくさんのルートを選択肢があります。Omgzlookは君のために良い訓練ツールを提供し、君のAmazon認証試に高品質の参考資料を提供しいたします。あなたの全部な需要を満たすためにいつも頑張ります。
購入意向があれば、Omgzlookのホームページをご覧になってください。我々Omgzlookはご客様のすべての需要を満たさせるために、より良いサービスを提供します。
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B
QUESTION NO: 2
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 3
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 4
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D
QUESTION NO: 5
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
Omgzlookの専門家チームがAmazonのEMC D-PSC-DY-23認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。 Palo Alto Networks PCNSE-JPN - 当然、購入した後、あなたはどんな疑問があると、次々に丁寧に返答できます。 ISTQB CT-AI - きっと君に失望させないと信じています。 我々はあなたにAmazon EMC D-GAI-F-01試験に合格させるために、全力を尽くします。 Lpi 701-100J - 我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。
Updated: May 28, 2022