われわれは今の競争の激しいIT社会ではくつかIT関連認定証明書が必要だとよくわかります。IT専門知識をテストしているAmazonのAWS-DevOps-Engineer-Professional試験攻略認定試験は1つのとても重要な認証試験でございます。しかしこの試験は難しさがあって、合格率がずっと低いです。 Omgzlookで、あなたの試験のためのテクニックと勉強資料を見つけることができます。OmgzlookのAmazonのAWS-DevOps-Engineer-Professional試験攻略試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。 Omgzlookは唯一のあなたの向いている試験に合格する方法で、Omgzlookを選んだら、美しい未来を選んだということになります。
AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional まだ何を待っているのでしょうか？
Omgzlookが提供したAmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)試験攻略トレーニング資料を利用したら、AmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)試験攻略認定試験に受かることはたやすくなります。 私たちは君がOmgzlookを選ぶことと正確性の高いAmazonのAWS-DevOps-Engineer-Professional 受験方法問題集を祝っています。OmgzlookのAmazonのAWS-DevOps-Engineer-Professional 受験方法問題集が君の認定試験に合格するのに大変役に立ちます。
OmgzlookのAmazonのAWS-DevOps-Engineer-Professional試験攻略試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。Omgzlookはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。
Amazon AWS-DevOps-Engineer-Professional試験攻略 - 早速買いに行きましょう。
我が社のOmgzlookはいつまでもお客様の需要を重点に置いて、他のサイトに比べより完備のAmazon試験資料を提供し、Amazon試験に参加する人々の通過率を保障できます。お客様に高質のAWS-DevOps-Engineer-Professional試験攻略練習問題を入手させるには、我々は常に真題の質を改善し足り、最新の試験に応じて真題をアープデートしたいしています。我々AWS-DevOps-Engineer-Professional試験攻略試験真題を暗記すれば、あなたはこの試験にパースすることができます。
OmgzlookのAmazonのAWS-DevOps-Engineer-Professional試験攻略試験トレーニング資料はAmazonのAWS-DevOps-Engineer-Professional試験攻略認定試験を準備するのリーダーです。Omgzlookの AmazonのAWS-DevOps-Engineer-Professional試験攻略試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
QUESTION NO: 2
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B
QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 4
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 5
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D
短時間でBlue Prism ROM2試験に一発合格したいなら、我々社のAmazonのBlue Prism ROM2資料を参考しましょう。 もちろん、我々はあなたに一番安心させるのは我々の開発する多くの受験生に合格させるAmazonのLinux Foundation FOCP試験のソフトウェアです。 あなたの資料を探す時間を節約し、Amazon CompTIA N10-008J試験の復習をやっています。 AmazonのCisco 820-605の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのAmazonのCisco 820-605試験に一番信頼できるヘルプを提供します。 SAP C_ARCIG_2404 - 現時点で我々サイトOmgzlookを通して、ようやくこの問題を心配することがありませんよ。
Updated: May 28, 2022