あなたのIT夢はどんなに大きくても、Omgzlookは君のそばにいていて、君の成功に助けます。Omgzlookの AmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。もし君はいささかな心配することがあるなら、あなたはOmgzlookの AmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験トレーニング資料を購入する前に、Omgzlookは無料でサンプルを提供することができますし、絶対に失望させません。 この問題集の合格率は高いので、多くのお客様からAWS-DevOps-Engineer-Professional日本語版受験参考書問題集への好評をもらいました。AWS-DevOps-Engineer-Professional日本語版受験参考書問題集のカーバー率が高いので、勉強した問題は試験に出ることが多いです。 あなたのAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験準備のどの段階にあっても、当社のソフトウェアは、あなたの最高のヘルパープロフォーマになることができます。
それはOmgzlookのAWS-DevOps-Engineer-Professional日本語版受験参考書問題集です。
Omgzlookが提供したAmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)日本語版受験参考書の問題集は真実の試験に緊密な相似性があります。 もし不合格になったら、私たちは全額返金することを保証します。一回だけでAmazonのAWS-DevOps-Engineer-Professional 日本語版試験勉強法試験に合格したい？Omgzlookは君の欲求を満たすために存在するのです。
もし君がAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書に参加すれば、良い学習のツルを選ぶすべきです。AmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書認定試験はIT業界の中でとても重要な認証試験で、合格するために良い訓練方法で準備をしなければなりません。。
Amazon AWS-DevOps-Engineer-Professional日本語版受験参考書 - 我々の誠意を信じてください。
現在でAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験を受かることができます。OmgzlookにAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験のフルバージョンがありますから、最新のAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書のトレーニング資料をあちこち探す必要がないです。Omgzlookを利用したら、あなたはもう最も良いAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書のトレーニング資料を見つけたのです。弊社の質問と解答を安心にご利用ください。あなたはきっとAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験に合格できますから。
自分のIT業界での発展を希望したら、AmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験に合格する必要があります。AmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験はいくつ難しくても文句を言わないで、我々Omgzlookの提供する資料を通して、あなたはAmazonのAWS-DevOps-Engineer-Professional日本語版受験参考書試験に合格することができます。
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
QUESTION NO: 2
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B
QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 4
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 5
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D
世界各地の人々はAmazonのCisco 200-301-KR認定試験が好きです。 弊社のSalesforce Public-Sector-Solutions問題集はあなたにこのチャンスを全面的に与えられます。 PRINCE2 PRINCE2-Foundation - Omgzlookは毎日異なる受験生に様々なトレーニング資料を提供します。 短時間でEMC D-GAI-F-01試験に一発合格したいなら、我々社のAmazonのEMC D-GAI-F-01資料を参考しましょう。 SAP C_TS462_2023 - あなたのニーズをよく知っていていますから、あなたに試験に合格する自信を与えます。
Updated: May 28, 2022