購入した前の無料の試み、購入するときのお支払いへの保障、購入した一年間の無料更新AmazonのAWS-DevOps-Engineer-Professional再テスト試験に失敗した全額での返金…これらは我々のお客様への承諾です。常々、時間とお金ばかり効果がないです。正しい方法は大切です。 弊社のAWS-DevOps-Engineer-Professional再テストのトレーニング資料を買ったら、一年間の無料更新サービスを差し上げます。もっと長い時間をもらって試験を準備したいのなら、あなたがいつでもサブスクリプションの期間を伸びることができます。 できるだけ100％の通過率を保証使用にしています。
AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional こんな生活はとてもつまらないですから。
それで、我々社の無料のAmazon AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)再テストデモを参考して、あなたに相応しい問題集を入手します。 AmazonのAWS-DevOps-Engineer-Professional 受験対策解説集認定試験と言ったら、人々は迷っています。異なる考えがありますが、要約は試験が大変難しいことです。
多分、AWS-DevOps-Engineer-Professional再テストテスト質問の数が伝統的な問題の数倍である。Amazon AWS-DevOps-Engineer-Professional再テスト試験参考書は全ての知識を含めて、全面的です。そして、AWS-DevOps-Engineer-Professional再テスト試験参考書の問題は本当の試験問題とだいたい同じことであるとわかります。
だから、Amazon AWS-DevOps-Engineer-Professional再テスト復習教材を買いました。
我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。AmazonのAWS-DevOps-Engineer-Professional再テストの購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのAmazonのAWS-DevOps-Engineer-Professional再テスト試験に一番信頼できるヘルプを提供します。AmazonのAWS-DevOps-Engineer-Professional再テスト試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。
あなたはその他のAmazon AWS-DevOps-Engineer-Professional再テスト「AWS Certified DevOps Engineer - Professional (DOP-C01)」認証試験に関するツールサイトでも見るかも知れませんが、弊社はIT業界の中で重要な地位があって、Omgzlookの問題集は君に100%で合格させることと君のキャリアに変らせることだけでなく一年間中で無料でサービスを提供することもできます。
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B
QUESTION NO: 2
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 4
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D
QUESTION NO: 5
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
自分の能力を証明するために、VMware 1V0-41.20試験に合格するのは不可欠なことです。 Omgzlookを通じて最新のAmazonのSAP C_HRHPC_2405試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。 HP HPE7-M01 - 我々Omgzlookは一番行き届いたアフタサービスを提供します。 Omgzlookが提供した研修ツールはAmazonのHP HPE0-V25の認定試験に向けて学習資料やシミュレーション訓練宿題で、重要なのは試験に近い練習問題と解答を提供いたします。 我々社サイトのAmazon Autodesk ACP-01101問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのはAutodesk ACP-01101資格認定試験の成功にとって唯一の選択です。
Updated: May 28, 2022