試験に失敗したら、全額で返金する承諾があります。だから、AmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験に合格したいあなたは安心で弊社の商品を選べばいいんです。我々のAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題ソフトを利用してお客様の高通過率及び我々の技術の高いチームで、我々は自信を持って我々Omgzlookは専門的なのだと言えます。 OmgzlookのAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題テストの問題と解答は本物の試験の挑戦で、あなたのいつもの考え方を変換しなければなりません。OmgzlookのAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題「AWS Certified DevOps Engineer - Professional (DOP-C01)」試験トレーニング資料はPDFぼ形式とソフトウェアの形式で提供して、OmgzlookのAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験問題と解答に含まれています。 暇な時間だけでAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験に合格したいのですか。
AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional あなた自身のために、証明書をもらいます。
たとえば、ベストセラーのAmazon AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)テストサンプル問題問題集は過去のデータを分析して作成ます。 現在のIT領域で競争が激しくなっていることは皆は良く知っていますから、みんなはIT認証を通じて自分の価値を高めたいです。私もそう思いますが、IT認証は私にとって大変難しいです。
AWS-DevOps-Engineer-Professionalテストサンプル問題問題集を利用して試験に合格できます。この問題集の合格率は高いので、多くのお客様からAWS-DevOps-Engineer-Professionalテストサンプル問題問題集への好評をもらいました。AWS-DevOps-Engineer-Professionalテストサンプル問題問題集のカーバー率が高いので、勉強した問題は試験に出ることが多いです。
Amazon AWS-DevOps-Engineer-Professionalテストサンプル問題 - 近年、IT領域で競争がますます激しくなります。
AmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験に合格するのは早ければ速いほどIT業界で発展られたいあなたにとってはよいです。あなたはこの重要な試験を準備するのは時間とお金がかかると聞いたことがあるかもしれませんが、それは我々提供するAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題ソフトを利用しなかったからです。複雑な整理と分析の過程はもう我々に完了されました。あなたは高効率の復習とAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験の成功を経験する必要があればいいです。
OmgzlookのAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。Omgzlookに会ったら、最高のトレーニング資料を見つけました。
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 2
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 4
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 5
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
SAP C-THR85-2405 - 数年間の発展で我々Omgzlookはもっと多くの資源と経験を得ています。 Salesforce CRT-251-JPN - OmgzlookはIT認定試験を受験した多くの人々を助けました。 OmgzlookのAdobe AD0-E121問題集を通して、他の人が手に入れない資格認証を簡単に受け取ります。 あなたを試験に一発合格させる素晴らしいEMC D-PM-IN-23試験に関連する参考書が登場しますよ。 IBM C1000-163 - あなたより優れる人は存在している理由は彼らはあなたの遊び時間を効率的に使用できることです。
Updated: May 28, 2022