いまAWS-DevOps試験解説試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいAWS-DevOps試験解説試験に関連する参考書が登場しますよ。それはOmgzlookのAWS-DevOps試験解説問題集です。 我々社の練習問題は長年でAWS-DevOps試験解説全真模擬試験トレーニング資料に研究している専業化チームによって編集されます。Amazon AWS-DevOps試験解説資格問題集はPDF版、ソフト版、オンライン版を含まれ、この三つバージョンから自分の愛用することを選んでいます。 ここには、私たちは君の需要に応じます。
AWS Certified DevOps Engineer AWS-DevOps もし弊社の問題集を勉強してそれは簡単になります。
AWS Certified DevOps Engineer AWS-DevOps試験解説 - AWS Certified DevOps Engineer - Professional (DOP-C01) 時間とお金の集まりより正しい方法がもっと大切です。 弊社の資料を使って、100%に合格を保証いたします。OmgzlookはIT試験問題集を提供するウエブダイトで、ここによく分かります。
自分のIT業界での発展を希望したら、AmazonのAWS-DevOps試験解説試験に合格する必要があります。AmazonのAWS-DevOps試験解説試験はいくつ難しくても文句を言わないで、我々Omgzlookの提供する資料を通して、あなたはAmazonのAWS-DevOps試験解説試験に合格することができます。AmazonのAWS-DevOps試験解説試験を準備しているあなたに試験に合格させるために、我々Omgzlookは模擬試験ソフトを更新し続けています。
Amazon AWS-DevOps試験解説 - しかも、一年間の無料更新サービスを提供します。
あなたはAWS-DevOps試験解説試験に不安を持っていますか?AWS-DevOps試験解説参考資料をご覧下さい。私たちのAWS-DevOps試験解説参考資料は十年以上にわたり、専門家が何度も練習して、作られました。あなたに高品質で、全面的なAWS-DevOps試験解説参考資料を提供することは私たちの責任です。私たちより、AWS-DevOps試験解説試験を知る人はいません。
Omgzlookは世界的にこの試験の合格率を最大限に高めることに力を尽くしています。AWS-DevOps試験解説認定試験と言ったら、信頼できるのを無視することは難しい。
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 2
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
QUESTION NO: 3
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 4
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 5
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
Dell D-AX-DY-A-00 - Omgzlookはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。 Omgzlook AmazonのFortinet FCP_FAC_AD-6.5試験材料は最も実用的なIT認定材料を提供することを確認することができます。 Qlik QSDA2024 - Omgzlook を選択して100%の合格率を確保することができて、もし試験に失敗したら、Omgzlookが全額で返金いたします。 心配することはないよ、OmgzlookのAmazonのSAP C_LCNC_2406試験トレーニング資料がありますから。 Splunk SPLK-2003 - そうしたらあなたはOmgzlookが用意した問題集にもっと自信があります。
Updated: May 28, 2022