しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。Omgzlookはあなたに難しいAWS-DevOps試験対策書認定試験に合格することを助けてあげますから。 Omgzlookの専門家チームがAmazonのAWS-DevOps試験対策書認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。AmazonのAWS-DevOps試験対策書「AWS Certified DevOps Engineer - Professional (DOP-C01)」認証試験に参加者に対して30時間ぐらいの短期の育成訓練でらくらくに勉強しているうちに多くの知識を身につけられます。 Omgzlookはあなたの成功を保証することができます。
AWS Certified DevOps Engineer AWS-DevOps きっと君に失望させないと信じています。
AWS Certified DevOps Engineer AWS-DevOps試験対策書 - AWS Certified DevOps Engineer - Professional (DOP-C01) 試験について最新の情報を伝えられます。 我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。Omgzlook AmazonのAWS-DevOps 全真問題集試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。
Omgzlookの学習教材はいろいろな狙いを含まれていますし、カバー率が高いですから、初心者にしても簡単に身に付けられます。それを利用したら、君はAmazonのAWS-DevOps試験対策書試験に合格する鍵を持つことができますし、今までも持っていない自信を持つこともできます。まだ何を待っているのでしょうか？
Amazon AWS-DevOps試験対策書 - それは正確性が高くて、カバー率も広いです。
現在IT技術会社に通勤しているあなたは、AmazonのAWS-DevOps試験対策書試験認定を取得しましたか？AWS-DevOps試験対策書試験認定は給料の増加とジョブのプロモーションに役立ちます。短時間でAWS-DevOps試験対策書試験に一発合格したいなら、我々社のAmazonのAWS-DevOps試験対策書資料を参考しましょう。また、AWS-DevOps試験対策書問題集に疑問があると、メールで問い合わせてください。
我々はあなたに提供するのは最新で一番全面的なAmazonのAWS-DevOps試験対策書問題集で、最も安全な購入保障で、最もタイムリーなAmazonのAWS-DevOps試験対策書試験のソフトウェアの更新です。無料デモはあなたに安心で購入して、購入した後1年間の無料AmazonのAWS-DevOps試験対策書試験の更新はあなたに安心で試験を準備することができます、あなたは確実に購入を休ませることができます私たちのソフトウェアを試してみてください。
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 2
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 4
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 5
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
ISQI CTAL-TTA_Syll19_4.0試験備考資料の整理を悩んでいますか。 AmazonのPECB ISO-IEC-27001-Lead-Auditor-KR試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。 だから、OmgzlookはあなたがAmazon Microsoft MS-102資格認定試験にパースする正確の方法です。 Salesforce CRT-251 - 社会と経済の発展につれて、多くの人はIT技術を勉強します。 言い換えば、受験者は短い時間をかけて勉強したら、Microsoft AZ-400試験に合格できます。
Updated: May 28, 2022