努力すれば報われますなので、Amazon AWS-DevOps的中合格問題集資格認定を取得して自分の生活状況を改善できます。IT職員のあなたは毎月毎月のあまり少ない給料を持っていますが、暇の時間でひたすら楽しむんでいいですか。Amazon AWS-DevOps的中合格問題集試験認定書はIT職員野給料増加と仕事の昇進にとって、大切なものです。 OmgzlookのAmazonのAWS-DevOps的中合格問題集試験トレーニング資料はOmgzlookのIT専門家たちが研究して、実践して開発されたものです。その高い正確性は言うまでもありません。 多分、AWS-DevOps的中合格問題集テスト質問の数が伝統的な問題の数倍である。
AWS Certified DevOps Engineer AWS-DevOps まだ何を待っていますか。
Omgzlookのシニア専門家チームはAmazonのAWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01)的中合格問題集試験に対してトレーニング教材を研究できました。 OmgzlookのAmazonのAWS-DevOps トレーリング学習試験トレーニング資料はAmazonのAWS-DevOps トレーリング学習認定試験を準備するのリーダーです。Omgzlookの AmazonのAWS-DevOps トレーリング学習試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。
AmazonのAWS-DevOps的中合格問題集は専門知識と情報技術の検査として認証試験で、Omgzlookはあなたに一日早くAmazonの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。Omgzlookにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。Omgzlookは君に対して特別の訓練を提供しています。
Amazon AWS-DevOps的中合格問題集 - Omgzlookを選択したら、成功をとりましょう。
社会と経済の発展につれて、多くの人はIT技術を勉強します。なぜならば、IT職員にとって、AmazonのAWS-DevOps的中合格問題集資格証明書があるのは肝心な指標であると言えます。自分の能力を証明するために、AWS-DevOps的中合格問題集試験に合格するのは不可欠なことです。弊社のAWS-DevOps的中合格問題集真題を入手して、試験に合格する可能性が大きくなります。
Omgzlookの勉強資料を手に入れたら、指示に従えば AWS-DevOps的中合格問題集認定試験に受かることはたやすくなります。受験生の皆様にもっと多くの助けを差し上げるために、Omgzlook のAmazonのAWS-DevOps的中合格問題集トレーニング資料はインターネットであなたの緊張を解消することができます。
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B
QUESTION NO: 2
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F
QUESTION NO: 3
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D
QUESTION NO: 4
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
QUESTION NO: 5
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
IBM S2000-024 - 我々Omgzlookは一番行き届いたアフタサービスを提供します。 当面、IT業界でAmazonのGoogle Professional-Data-Engineer-JPN認定試験の信頼できるソースが必要です。 我々社サイトのAmazon EMC D-ZT-DS-P-23問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのはEMC D-ZT-DS-P-23資格認定試験の成功にとって唯一の選択です。 Dell D-VCFVXR-A-01 - 皆さんは節約した時間とエネルギーを利用してもっと多くの金銭を稼ぐことができます。 あなたは無料でDell D-RPVM-A-01復習教材をダウンロードしたいですか?もちろん、回答ははいです。
Updated: May 28, 2022