我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。AmazonのAWS-DevOps日本語版試験解答の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのAmazonのAWS-DevOps日本語版試験解答試験に一番信頼できるヘルプを提供します。AmazonのAWS-DevOps日本語版試験解答試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。 キャンパース内のIT知識を学ぶ学生なり、IT職人なり、AWS-DevOps日本語版試験解答試験資格認証証明書を取得して、社会需要に応じて自分の能力を高めます。我々社は最高のAmazon AWS-DevOps日本語版試験解答試験問題集を開発し提供して、一番なさービスを与えて努力しています。 自分の能力を証明するために、AWS-DevOps日本語版試験解答試験に合格するのは不可欠なことです。
AWS Certified DevOps Engineer AWS-DevOps 最もよくて最新で資料を提供いたします。
AmazonのAWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01)日本語版試験解答の認定試験に合格するのは簡単ではなくて、OmgzlookはAWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01)日本語版試験解答試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、Omgzlookから君に合ったツールを選択してください。 Amazon AWS-DevOps 関連資料「AWS Certified DevOps Engineer - Professional (DOP-C01)」認証試験に合格することが簡単ではなくて、Amazon AWS-DevOps 関連資料証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
現在の社会の中で優秀な人材が揃てIT人材も多く、競争もとても大きくて、だから多くのIT者はにIT関する試験に参加するIT業界での地位のために奮闘しています。AWS-DevOps日本語版試験解答試験はAmazonの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。
Amazon AWS-DevOps日本語版試験解答 - 成功を祈ります。
Omgzlookは実際の環境で本格的なAmazonのAWS-DevOps日本語版試験解答「AWS Certified DevOps Engineer - Professional (DOP-C01)」の試験の準備過程を提供しています。もしあなたは初心者若しくは専門的な技能を高めたかったら、OmgzlookのAmazonのAWS-DevOps日本語版試験解答「AWS Certified DevOps Engineer - Professional (DOP-C01)」の試験問題があなたが一歩一歩自分の念願に近くために助けを差し上げます。試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。
AmazonのAWS-DevOps日本語版試験解答認定試験「AWS Certified DevOps Engineer - Professional (DOP-C01)」によい準備ができて、試験に穏やかな心情をもって扱うことができます。Omgzlookの専門家が研究された問題集を利用してください。
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A company is hosting a web application in an AWS Region. For disaster recovery purposes, a second region is being used as a standby. Disaster recovery requirements state that session data must be replicated between regions in near-real time and 1% of requests should route to the secondary region to continuously verify system functionality. Additionally, if there is a disruption in service in the main region, traffic should be automatically routed to the secondary region, and the secondary region must be able to scale up to handle all traffic.
How should a DevOps Engineer meet these requirements?
A. In both regions, deploy the application on AWS Elastic Beanstalk and use Amazon DynamoDB global tables for session data. Use an Amazon Route 53 weighted routing policy with health checks to distribute the traffic across the regions.
B. In both regions, launch the application in Auto Scaling groups and use DynamoDB for session data.
Use a Route 53 failover routing policy with health checks to distribute the traffic across the regions.
C. In both regions, deploy the application in AWS Lambda, exposed by Amazon API Gateway, and use
Amazon RDS PostgreSQL with cross-region replication for session data. Deploy the web application with client-side logic to call the API Gateway directly.
D. In both regions, launch the application in Auto Scaling groups and use DynamoDB global tables for session data. Enable an Amazon CloudFront weighted distribution across regions. Point the Amazon
Route 53 DNS record at the CloudFront distribution.
Answer: C
QUESTION NO: 2
A defect was discovered in production and a new sprint item has been created for deploying a hotfix.
However, any code change must go through the following steps before going into production:
*Scan the code for security breaches, such as password and access key leaks.
Run the code through extensive, long running unit tests.
Which source control strategy should a DevOps Engineer use in combination with AWS CodePipeline to complete this process?
A. Create a hotfix branch from the master branch. Triger the development pipeline from the hotfix branch.
Use AWS Lambda to do a content scan and run unit tests. Add a manual approval stage that merges the hotfix branch into the master branch.
B. Create a hotfix branch from the master branch. Create a separate source stage for the hotfix branch in the production pipeline. Trigger the pipeline from the hotfix branch. Use AWS Lambda to do a content scan and use AWS CodeBuild to run unit tests. Add a manual approval stage that merges the hotfix branch into the master branch.
C. Create a hotfix branch from the master branch. Triger the development pipeline from the hotfix branch.
Use AWS CodeBuild to do a content scan and run unit tests. Add a manual approval stage that merges the hotfix branch into the master branch.
D. Create a hotfix tag on the last commit of the master branch. Trigger the development pipeline from the hotfix tag. Use AWS CodeDeploy with Amazon ECS to do a content scan and run unit tests.
Add a manual approval stage that merges the hotfix tag into the master branch.
Answer: D
QUESTION NO: 3
A government agency has multiple AWS accounts, many of which store sensitive citizen information. A Security team wants to detect anomalous account and network activities (such as SSH brute force attacks) in any account and centralize that information in a dedicated security account.
Event information should be stored in an Amazon S3 bucket in the security account, which is monitored by the department's Security Information and Even Manager (SIEM) system.
How can this be accomplished?
A. Enable Amazon Macie in the security account only. Configure the security account as the Macie
Administrator for every member account using invitation/ acceptance. Create an Amazon
CloudWatch Events rule in the security account to send all findings to Amazon Kinesis Data Streams.
Write and application using KCL to read data from the Kinesis Data Streams and write to the S3 bucket.
B. Enable Amazon GuardDuty in every account. Configure the security account as the GuardDuty
Administrator for every member account using invitation/ acceptance. Create an Amazon
CloudWatch rule in the security account to send all findings to Amazon Kinesis Data Firehouse, which will push the findings to the S3 bucket.
C. Enable Amazon GuardDuty in the security account only. Configure the security account as the
GuardDuty Administrator for every member account using invitation/acceptance. Create an Amazon
CloudWatch rule in the security account to send all findings to Amazon Kinesis Data Streams. Write and application using KCL to read data from Kinesis Data Streams and write to the S3 bucket.
D. Enable Amazon Macie in every account. Configure the security account as the Macie
Administrator for every member account using invitation/acceptance. Create an Amazon CloudWatch
Events rule in the security account to send all findings to Amazon Kinesis Data Firehouse, which should push the findings to the S3 bucket.
Answer: C
QUESTION NO: 4
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D
QUESTION NO: 5
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B
NAHP NRCMA - 我々は心からあなたが首尾よく試験に合格することを願っています。 OmgzlookのAmazonのEMC D-PM-IN-23認定試験の問題と解答はそういう人たちのニーズを答えるために研究した成果です。 OmgzlookのAmazonのCisco 200-901試験トレーニング資料はIT人員の皆さんがそんな目標を達成できるようにヘルプを提供して差し上げます。 EMC D-ISM-FN-23-KR - 実は措置を取ったら一回で試験に合格することができます。 ISACA CISA-KR - 夢を持ったら実現するために頑張ってください。
Updated: May 28, 2022