AmazonのAWS-DevOps日本語版問題解説認定試験に合格することはきっと君の職業生涯の輝い将来に大変役に立ちます。Omgzlookを選ぶなら、君がAmazonのAWS-DevOps日本語版問題解説認定試験に合格するということできっと喜んでいます。OmgzlookのAmazonのAWS-DevOps日本語版問題解説問題集を購入するなら、君がAmazonのAWS-DevOps日本語版問題解説認定試験に合格する率は１００パーセントです。 IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてAmazonのAWS-DevOps日本語版問題解説試験に参加して認可を得たくて、Amazon のAWS-DevOps日本語版問題解説試験が難度の高いので合格率も比較的低いです。Omgzlookの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。 常々、時間とお金ばかり効果がないです。
AWS Certified DevOps Engineer AWS-DevOps 暇の時間を利用して勉強します。
AWS Certified DevOps Engineer AWS-DevOps日本語版問題解説 - AWS Certified DevOps Engineer - Professional (DOP-C01) それは受験生のために特別に作成したものですから、１００パーセントの合格率を保証します。 多分、AWS-DevOps 復習問題集テスト質問の数が伝統的な問題の数倍である。Amazon AWS-DevOps 復習問題集試験参考書は全ての知識を含めて、全面的です。
しかし、あまりにも心配する必要はありません。試験に準備するとき、適当な方法を利用する限り、楽に試験に合格することができないわけではないです。では、どんな方法が効果的な方法なのかわかっていますか。
Amazon AWS-DevOps日本語版問題解説復習教材は有効的な資料です。
我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。AmazonのAWS-DevOps日本語版問題解説の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのAmazonのAWS-DevOps日本語版問題解説試験に一番信頼できるヘルプを提供します。AmazonのAWS-DevOps日本語版問題解説試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。
あなたはその他のAmazon AWS-DevOps日本語版問題解説「AWS Certified DevOps Engineer - Professional (DOP-C01)」認証試験に関するツールサイトでも見るかも知れませんが、弊社はIT業界の中で重要な地位があって、Omgzlookの問題集は君に100%で合格させることと君のキャリアに変らせることだけでなく一年間中で無料でサービスを提供することもできます。
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B
QUESTION NO: 2
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 3
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D
QUESTION NO: 4
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 5
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
自分の能力を証明するために、Microsoft PL-300J試験に合格するのは不可欠なことです。 Omgzlookを通じて最新のAmazonのISACA CISA-JPN試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。 Microsoft SC-100J - 我々Omgzlookは一番行き届いたアフタサービスを提供します。 Amazon SAA-C03 - Omgzlook を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。 我々社サイトのAmazon ISC CISSP-JP問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのはISC CISSP-JP資格認定試験の成功にとって唯一の選択です。
Updated: May 28, 2022