AmazonのSAP-C01赤本勉強試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でOmgzlookは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。 弊社の認証試験のソフトウェアはもうベンダーとサードパーティーの認可を取り、大量なIT技術専門家たちがいますから、お客さんのニーズを答えるためにアウトラインに基づいてシリーズの製品を開発して、お客様の大量の要求を満たすことを保障します。AmazonのSAP-C01赤本勉強試験資料は最高の専門技術の内容を持っていますから、関連する知識の専門家と学者は研究する材料として利用することができます。 Omgzlookはあなたの夢に実現させるサイトでございます。
AWS Certified Solutions Architect SAP-C01 あなたは最高のトレーニング資料を手に入れました。
Omgzlookの試験トレーニング資料はAmazonのSAP-C01 - AWS Certified Solutions Architect - Professional赤本勉強認定試験の１００パーセントの合格率を保証します。 ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。
Omgzlookで、あなたの試験のためのテクニックと勉強資料を見つけることができます。OmgzlookのAmazonのSAP-C01赤本勉強試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。Omgzlookに会ったら、最高のトレーニング資料を見つけました。
Amazon SAP-C01赤本勉強 - 不思議でしょう。
SAP-C01赤本勉強認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまSAP-C01赤本勉強試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいSAP-C01赤本勉強試験に関連する参考書が登場しますよ。それはOmgzlookのSAP-C01赤本勉強問題集です。気楽に試験に合格したければ、はやく試しに来てください。
それは正確的な試験の内容を保証しますし、良いサービスで、安い価格で営業します。Omgzlookがあれば、AmazonのSAP-C01赤本勉強試験に合格するのは心配しません。
SAP-C01 PDF DEMO:
QUESTION NO: 1
A company deployed a three-tier web application in two regions: us-east-1 and eu-west-1. The application must be active in both regions at the same time. The database tier of the application uses a single Amazon RDS Aurora database globally, with a master in us-east-1 and a read replica in eu- west-1. Both regions are connected by a VPN.
The company wants to ensure that the application remains available even in the event of a region- level failure of all of the application's components. It is acceptable for the application to be in read- only mode for up to 1 hour. The company plans to configure two Amazon Route 53 record sets, one for each of the regions.
How should the company complete the configuration to meet its requirements while providing the lowest latency for the application end-users? (Choose two.)
A. Use failover routing and configure the us-east-1 record set as primary and the eu-west-1 record set as secondary. Configure an HTTP health check for the web application in us-east-1, and associate it to the us-east-1 record set.
B. Use weighted routing and configure each record set with a weight of 50. Configure an HTTP health check for each region, and attach it to the record set for that region.
C. Configure an Amazon RDS event notifications to react to the failure of the database in us-east-1 by invoking an AWS Lambda function that promotes the read replica in eu-west-1.
D. Use latency-based routing for both record sets. Configure a health check for each region and attach it to the record set for that region.
E. Configure an Amazon CloudWatch alarm for the health checks in us-east-1, and have it invoke an
AWS Lambda function that promotes the read replica in eu-west-1.
Answer: C,D
Explanation
https://docs.aws.amazon.com/lambda/latest/dg/services-rds.html
QUESTION NO: 2
A company has a large on-premises Apache Hadoop cluster with a 20 PB HDFS database. The cluster is growing every quarter by roughly 200 instances and 1 PB. The company's goals are to enable resiliency for its Hadoop data, limit the impact of losing cluster nodes, and significantly reduce costs. The current cluster runs 24/7 and supports a variety of analysis workloads, including interactive queries and batch processing.
Which solution would meet these requirements with the LEAST expense and down time?
A. Use AWS Snowmobile to migrate the existing cluster data to Amazon S3. Create a persistent
Amazon EMR cluster initially sized to handle the interactive workload based on historical data from the on-premises cluster. Store the data on EMRFS. Minimize costs using Reserved Instances for master and core nodes and Spot Instances for task nodes, and auto scale task nodes based on
Amazon CloudWatch metrics. Create job-specific, optimized clusters for batch workloads that are similarly optimized.
B. Use AWS Snowmobile to migrate the existing cluster data to Amazon S3. Create a persistent
Amazon EMR cluster of similar size and configuration to the current cluster. Store the data on EMRFS.
Minimize costs by using Reserved Instances. As the workload grows each quarter, purchase additional
Reserved Instances and add to the cluster.
C. Use AWS Direct Connect to migrate the existing cluster data to Amazon S3. Create a persistent
Amazon EMR cluster initially sized to handle the interactive workload based on historical data from the on-premises cluster. Store the data on EMRFS. Minimize costs using Reserved Instances for master and core nodes and Spot Instances for task nodes, and auto scale task nodes based on
Amazon CloudWatch metrics. Create job-specific, optimized clusters for batch workloads that are similarly optimized.
D. Use AWS Snowball to migrate the existing cluster data to Amazon S3. Create a persistent Amazon
EMR cluster initially sized to handle the interactive workloads based on historical data from the on- premises cluster. Store the on EMRFS. Minimize costs using Reserved Instances for master and core nodes and Spot Instances for task nodes, and auto scale task nodes based on Amazon CloudWatch metrics. Create job-specific, optimized clusters for batch workloads that are similarly optimized.
Answer: A
Explanation
Q: How should I choose between Snowmobile and Snowball?
To migrate large datasets of 10PB or more in a single location, you should use Snowmobile. For datasets less than 10PB or distributed in multiple locations, you should use Snowball. In addition, you should evaluate the amount of available bandwidth in your network backbone. If you have a high speed backbone with hundreds of Gb/s of spare throughput, then you can use Snowmobile to migrate the large datasets all at once. If you have limited bandwidth on your backbone, you should consider using multiple Snowballs to migrate the data incrementally.
QUESTION NO: 3
A company wants to ensure that the workloads for each of its business units have complete autonomy and a minimal blast radius in AWS. The Security team must be able to control access to the resources and services in the account to ensure that particular services are not used by the business units.
How can a Solutions Architect achieve the isolation requirements?
A. Create one shared account for the entire company. Create individual IAM policies and resource tags for each business unit. Federate the account with an IdP, and create separate roles for the business units and the Security team.
B. Create individual accounts for each business unit. Federate each account with an IdP and create separate roles and policies for business units and the Security team.
C. Create one shared account for the entire company. Create separate VPCs for each business unit.
Create individual IAM policies and resource tags for each business unit. Federate each account with an IdP, and create separate roles for the business units and the Security team.
D. Create individual accounts for each business unit and add the account to an OU in AWS
Organizations.
Modify the OU to ensure that the particular services are blocked. Federate each account with an IdP, and create separate roles for the business units and the Security team.
Answer: D
QUESTION NO: 4
A company has an application that runs a web service on Amazon EC2 instances and stores .jpg images in Amazon S3. The web traffic has a predictable baseline, but often demand spikes unpredictably for short periods of time. The application is loosely coupled and stateless. The .jpg images stored in Amazon S3 are accessed frequently for the first 15 to 20 days, they are seldom accessed thereafter but always need to be immediately available. The CIO has asked to find ways to reduce costs.
Which of the following options will reduce costs? (Choose two.)
A. Create a script that checks the load on all web servers and terminates unnecessary On-Demand instances.
B. Configure a lifecycle policy to move the .jpg images on Amazon S3 to S3 IA after 30 days.
C. Configure a lifecycle policy to move the .jpg images on Amazon S3 to Amazon Glacier after 30 days.
D. Purchase Reserved instances for baseline capacity requirements and use On-Demand instances for the demand spikes.
E. Use On-Demand instances for baseline capacity requirements and use Spot Fleet instances for the demand spikes.
Answer: B,D
QUESTION NO: 5
A media storage application uploads user photos to Amazon S3 for processing. End users are reporting that some uploaded photos are not being processed properly. The Application Developers trace the logs and find that AWS Lambda is experiencing execution issues when thousands of users are on the system simultaneously.
Issues are caused by:
* Limits around concurrent executions.
* The performance of Amazon DynamoDB when saving data.
Which actions can be taken to increase the performance and reliability of the application? (Choose two.)
A. Configure a dead letter queue that will reprocess failed or timed-out Lambda functions.
B. Add an Amazon ElastiCache layer to increase the performance of Lambda functions.
C. Evaluate and adjust the write capacity units (WCUs) for the DynamoDB tables.
D. Evaluate and adjust the read capacity units (RCUs) for the DynamoDB tables.
E. Use S3 Transfer Acceleration to provide lower-latency access to end users.
Answer: A,C
Explanation
B:
https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadWriteCap acityMode.ht
D: https://aws.amazon.com/blogs/compute/robust-serverless-application-design-with-aws-lambda- dlq/c
HP HPE0-V28-KR - ここには、私たちは君の需要に応じます。 Apple Apple-Device-Support-JPN - Omgzlookを選ぶなら、絶対に後悔させません。 OmgzlookのAmazonのVMware 5V0-63.23試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。 私たちは最も新しくて、最も正確性の高いAmazonのCompTIA DY0-001試験トレーニング資料を提供します。 Dell D-PVMD24-DY-A-00 - 我々の誠意を信じてください。
Updated: May 28, 2022