そして、SAP-C01勉強資料試験参考書の問題は本当の試験問題とだいたい同じことであるとわかります。SAP-C01勉強資料試験参考書があれば,ほかの試験参考書を勉強する必要がないです。多分、SAP-C01勉強資料テスト質問の数が伝統的な問題の数倍である。 もしAmazonのSAP-C01勉強資料問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。OmgzlookのAmazonのSAP-C01勉強資料試験トレーニング資料は全てのIT認定試験に通用します。 AmazonのSAP-C01勉強資料の認定試験に合格すれば、就職機会が多くなります。
AWS Certified Solutions Architect SAP-C01 きっと君に失望させないと信じています。
弊社のSAP-C01 - AWS Certified Solutions Architect - Professional勉強資料問題集は他のサイトに比べて、試験の範囲をカバーすることはより広くて、合理的な価格があります。 我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。Omgzlook AmazonのSAP-C01 資格認定試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。
我々OmgzlookはAmazonのSAP-C01勉強資料試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。また、我々はさらに認可を受けられるために、皆様の一切の要求を満足できて喜ぶ気持ちでずっと協力し、完備かつ精確のSAP-C01勉強資料試験問題集を開発するのに準備します。
Amazon SAP-C01勉強資料 - 素晴らしい試験参考書です。
IT認定試験の中でどんな試験を受けても、OmgzlookのSAP-C01勉強資料試験参考資料はあなたに大きなヘルプを与えることができます。それは OmgzlookのSAP-C01勉強資料問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。真剣にOmgzlookのAmazon SAP-C01勉強資料問題集を勉強する限り、受験したい試験に楽に合格することができるということです。
弊社は強力な教師チームがあって、彼たちは正確ではやくて例年のAmazon SAP-C01勉強資料認定試験の資料を整理して、直ちにもっとも最新の資料を集めて、弊社は全会一緻で認められています。Amazon SAP-C01勉強資料試験認証に合格確率はとても小さいですが、Omgzlookはその合格確率を高めることが信じてくだい。
SAP-C01 PDF DEMO:
QUESTION NO: 1
A company deployed a three-tier web application in two regions: us-east-1 and eu-west-1. The application must be active in both regions at the same time. The database tier of the application uses a single Amazon RDS Aurora database globally, with a master in us-east-1 and a read replica in eu- west-1. Both regions are connected by a VPN.
The company wants to ensure that the application remains available even in the event of a region- level failure of all of the application's components. It is acceptable for the application to be in read- only mode for up to 1 hour. The company plans to configure two Amazon Route 53 record sets, one for each of the regions.
How should the company complete the configuration to meet its requirements while providing the lowest latency for the application end-users? (Choose two.)
A. Use failover routing and configure the us-east-1 record set as primary and the eu-west-1 record set as secondary. Configure an HTTP health check for the web application in us-east-1, and associate it to the us-east-1 record set.
B. Use weighted routing and configure each record set with a weight of 50. Configure an HTTP health check for each region, and attach it to the record set for that region.
C. Configure an Amazon RDS event notifications to react to the failure of the database in us-east-1 by invoking an AWS Lambda function that promotes the read replica in eu-west-1.
D. Use latency-based routing for both record sets. Configure a health check for each region and attach it to the record set for that region.
E. Configure an Amazon CloudWatch alarm for the health checks in us-east-1, and have it invoke an
AWS Lambda function that promotes the read replica in eu-west-1.
Answer: C,D
Explanation
https://docs.aws.amazon.com/lambda/latest/dg/services-rds.html
QUESTION NO: 2
A company wants to ensure that the workloads for each of its business units have complete autonomy and a minimal blast radius in AWS. The Security team must be able to control access to the resources and services in the account to ensure that particular services are not used by the business units.
How can a Solutions Architect achieve the isolation requirements?
A. Create one shared account for the entire company. Create individual IAM policies and resource tags for each business unit. Federate the account with an IdP, and create separate roles for the business units and the Security team.
B. Create individual accounts for each business unit. Federate each account with an IdP and create separate roles and policies for business units and the Security team.
C. Create one shared account for the entire company. Create separate VPCs for each business unit.
Create individual IAM policies and resource tags for each business unit. Federate each account with an IdP, and create separate roles for the business units and the Security team.
D. Create individual accounts for each business unit and add the account to an OU in AWS
Organizations.
Modify the OU to ensure that the particular services are blocked. Federate each account with an IdP, and create separate roles for the business units and the Security team.
Answer: D
QUESTION NO: 3
A company has a large on-premises Apache Hadoop cluster with a 20 PB HDFS database. The cluster is growing every quarter by roughly 200 instances and 1 PB. The company's goals are to enable resiliency for its Hadoop data, limit the impact of losing cluster nodes, and significantly reduce costs. The current cluster runs 24/7 and supports a variety of analysis workloads, including interactive queries and batch processing.
Which solution would meet these requirements with the LEAST expense and down time?
A. Use AWS Snowmobile to migrate the existing cluster data to Amazon S3. Create a persistent
Amazon EMR cluster initially sized to handle the interactive workload based on historical data from the on-premises cluster. Store the data on EMRFS. Minimize costs using Reserved Instances for master and core nodes and Spot Instances for task nodes, and auto scale task nodes based on
Amazon CloudWatch metrics. Create job-specific, optimized clusters for batch workloads that are similarly optimized.
B. Use AWS Snowmobile to migrate the existing cluster data to Amazon S3. Create a persistent
Amazon EMR cluster of similar size and configuration to the current cluster. Store the data on EMRFS.
Minimize costs by using Reserved Instances. As the workload grows each quarter, purchase additional
Reserved Instances and add to the cluster.
C. Use AWS Direct Connect to migrate the existing cluster data to Amazon S3. Create a persistent
Amazon EMR cluster initially sized to handle the interactive workload based on historical data from the on-premises cluster. Store the data on EMRFS. Minimize costs using Reserved Instances for master and core nodes and Spot Instances for task nodes, and auto scale task nodes based on
Amazon CloudWatch metrics. Create job-specific, optimized clusters for batch workloads that are similarly optimized.
D. Use AWS Snowball to migrate the existing cluster data to Amazon S3. Create a persistent Amazon
EMR cluster initially sized to handle the interactive workloads based on historical data from the on- premises cluster. Store the on EMRFS. Minimize costs using Reserved Instances for master and core nodes and Spot Instances for task nodes, and auto scale task nodes based on Amazon CloudWatch metrics. Create job-specific, optimized clusters for batch workloads that are similarly optimized.
Answer: A
Explanation
Q: How should I choose between Snowmobile and Snowball?
To migrate large datasets of 10PB or more in a single location, you should use Snowmobile. For datasets less than 10PB or distributed in multiple locations, you should use Snowball. In addition, you should evaluate the amount of available bandwidth in your network backbone. If you have a high speed backbone with hundreds of Gb/s of spare throughput, then you can use Snowmobile to migrate the large datasets all at once. If you have limited bandwidth on your backbone, you should consider using multiple Snowballs to migrate the data incrementally.
QUESTION NO: 4
A company has an application that runs a web service on Amazon EC2 instances and stores .jpg images in Amazon S3. The web traffic has a predictable baseline, but often demand spikes unpredictably for short periods of time. The application is loosely coupled and stateless. The .jpg images stored in Amazon S3 are accessed frequently for the first 15 to 20 days, they are seldom accessed thereafter but always need to be immediately available. The CIO has asked to find ways to reduce costs.
Which of the following options will reduce costs? (Choose two.)
A. Create a script that checks the load on all web servers and terminates unnecessary On-Demand instances.
B. Configure a lifecycle policy to move the .jpg images on Amazon S3 to S3 IA after 30 days.
C. Configure a lifecycle policy to move the .jpg images on Amazon S3 to Amazon Glacier after 30 days.
D. Purchase Reserved instances for baseline capacity requirements and use On-Demand instances for the demand spikes.
E. Use On-Demand instances for baseline capacity requirements and use Spot Fleet instances for the demand spikes.
Answer: B,D
QUESTION NO: 5
A media storage application uploads user photos to Amazon S3 for processing. End users are reporting that some uploaded photos are not being processed properly. The Application Developers trace the logs and find that AWS Lambda is experiencing execution issues when thousands of users are on the system simultaneously.
Issues are caused by:
* Limits around concurrent executions.
* The performance of Amazon DynamoDB when saving data.
Which actions can be taken to increase the performance and reliability of the application? (Choose two.)
A. Configure a dead letter queue that will reprocess failed or timed-out Lambda functions.
B. Add an Amazon ElastiCache layer to increase the performance of Lambda functions.
C. Evaluate and adjust the write capacity units (WCUs) for the DynamoDB tables.
D. Evaluate and adjust the read capacity units (RCUs) for the DynamoDB tables.
E. Use S3 Transfer Acceleration to provide lower-latency access to end users.
Answer: A,C
Explanation
B:
https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadWriteCap acityMode.ht
D: https://aws.amazon.com/blogs/compute/robust-serverless-application-design-with-aws-lambda- dlq/c
Juniper JN0-683 - Amazonの認証資格は最近ますます人気になっていますね。 Dell D-ISAZ-A-01 - Omgzlookが提供した資料は最も全面的で、しかも更新の最も速いです。 EMC D-CS-DS-23 - 早速買いに行きましょう。 Omgzlookのシニア専門家チームはAmazonのHP HP2-I72試験に対してトレーニング教材を研究できました。 Scrum PAL-I - それは正確性が高くて、カバー率も広いです。
Updated: May 28, 2022