H31-161認定資格 & Huawei HCIE Carrier IP (Written)模擬資料 - Omgzlook

自分の幸せは自分で作るものだと思われます。ただ、社会に入るIT卒業生たちは自分能力の不足で、H31-161認定資格試験向けの仕事を探すのを悩んでいますか?それでは、弊社のHuaweiのH31-161認定資格練習問題を選んで実用能力を速く高め、自分を充実させます。その結果、自信になる自己は面接のときに、面接官のいろいろな質問を気軽に回答できて、順調にH31-161認定資格向けの会社に入ります。 なぜみんなが順調にHuaweiのH31-161認定資格試験に合格できることに対する好奇心がありますか。HuaweiのH31-161認定資格試験に合格したいんですか。 我々H31-161認定資格問題集の通過率は高いので、90%の合格率を保証します。

HCIE-Carrier IP H31-161 暇の時間を利用して勉強します。

HCIE-Carrier IP H31-161認定資格 - HCIE-Carrier IP (Written) それに、これらの資料は我々Omgzlookのウェブサイトで見つけることができます。 多分、H31-161 模擬対策テスト質問の数が伝統的な問題の数倍である。Huawei H31-161 模擬対策試験参考書は全ての知識を含めて、全面的です。

時間が経つとともに、我々はインタネット時代に生活します。この時代にはIT資格認証を取得するは重要になります。それでは、H31-161認定資格試験に参加しよう人々は弊社OmgzlookのH31-161認定資格問題集を選らんで勉強して、一発合格して、HuaweiIT資格証明書を受け取れます。

Huawei H31-161認定資格 - そして、試験を安心に参加してください。

Omgzlookが提供したHuaweiのH31-161認定資格トレーニング資料を利用したら、HuaweiのH31-161認定資格認定試験に受かることはたやすくなります。Omgzlookがデザインしたトレーニングツールはあなたが一回で試験に合格することにヘルプを差し上げられます。 OmgzlookのHuaweiのH31-161認定資格トレーニング資料即ち問題と解答をダウンロードする限り、気楽に試験に受かることができるようになります。まだ困っていたら、我々の試用版を使ってみてください。ためらわずに速くあなたのショッピングカートに入れてください。でないと、絶対後悔しますよ。

IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてHuaweiのH31-161認定資格試験に参加して認可を得たくて、Huawei のH31-161認定資格試験が難度の高いので合格率も比較的低いです。HuaweiのH31-161認定資格試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。

H31-161 PDF DEMO:

QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D

QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D

QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C

QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B

QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E

HP HPE6-A86 - Omgzlookはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。 Fortinet NSE6_FSR-7.3 - 弊社は100%合格率を保証し、購入前にネットでダウンロードしてください。 試験の準備をするためにOmgzlookのHuaweiのSAP C-C4H46-2408試験トレーニング資料を買うのは冒険的行為と思ったとしたら、あなたの人生の全てが冒険なことになります。 Dell D-PWF-RDY-A-00 - こうしてHuawei認定試験がとても重要になります。 真剣にOmgzlookのHuawei Microsoft PL-300問題集を勉強する限り、受験したい試験に楽に合格することができるということです。

Updated: May 27, 2022