H31-161試験対策書、H31-161コンポーネント - Huawei H31-161出題範囲 - Omgzlook

我々はあなたに提供するのは最新で一番全面的なHuaweiのH31-161試験対策書問題集で、最も安全な購入保障で、最もタイムリーなHuaweiのH31-161試験対策書試験のソフトウェアの更新です。無料デモはあなたに安心で購入して、購入した後1年間の無料HuaweiのH31-161試験対策書試験の更新はあなたに安心で試験を準備することができます、あなたは確実に購入を休ませることができます私たちのソフトウェアを試してみてください。もちろん、我々はあなたに一番安心させるのは我々の開発する多くの受験生に合格させるHuaweiのH31-161試験対策書試験のソフトウェアです。 お客様は自分に相応しいH31-161試験対策書問題集のバージョンを選ぶことができます。弊社は「ご客様の満足度は私達のサービス基準である」の原則によって、いつまでもご客様に行き届いたサービスを提供できて喜んでいます。 HuaweiのH31-161試験対策書試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。

HCIE-Carrier IP H31-161 こうして、君は安心で試験の準備を行ってください。

HuaweiのH31-161 - HCIE-Carrier IP (Written)試験対策書の認定試験に合格するのは簡単ではなくて、OmgzlookはH31-161 - HCIE-Carrier IP (Written)試験対策書試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、Omgzlookから君に合ったツールを選択してください。 Huawei H31-161 模擬資料「HCIE-Carrier IP (Written)」認証試験に合格することが簡単ではなくて、Huawei H31-161 模擬資料証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。

現在の社会の中で優秀な人材が揃てIT人材も多く、競争もとても大きくて、だから多くのIT者はにIT関する試験に参加するIT業界での地位のために奮闘しています。H31-161試験対策書試験はHuaweiの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

Huawei H31-161試験対策書 - 成功を祈ります。

Omgzlookは実際の環境で本格的なHuaweiのH31-161試験対策書「HCIE-Carrier IP (Written)」の試験の準備過程を提供しています。もしあなたは初心者若しくは専門的な技能を高めたかったら、OmgzlookのHuaweiのH31-161試験対策書「HCIE-Carrier IP (Written)」の試験問題があなたが一歩一歩自分の念願に近くために助けを差し上げます。試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。

HuaweiのH31-161試験対策書認定試験「HCIE-Carrier IP (Written)」によい準備ができて、試験に穏やかな心情をもって扱うことができます。Omgzlookの専門家が研究された問題集を利用してください。

H31-161 PDF DEMO:

QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D

QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C

QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B

QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E

QUESTION NO: 5
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D

IBM C1000-187 - 我々は心からあなたが首尾よく試験に合格することを願っています。 ISACA COBIT-2019 - この試験に合格することがたやすいことではないですから、適切なショートカットを選択するのは成功することの必要です。 OmgzlookのHuaweiのTeraData TDVCL2試験トレーニング資料はIT人員の皆さんがそんな目標を達成できるようにヘルプを提供して差し上げます。 IIBA ECBA - 実は措置を取ったら一回で試験に合格することができます。 Microsoft SC-300J - 夢を持ったら実現するために頑張ってください。

Updated: May 27, 2022