一回だけでAmazonのDOP-C01トレーニング費用試験に合格したい？Omgzlookは君の欲求を満たすために存在するのです。Omgzlookは君にとってベストな選択になります。ここには、私たちは君の需要に応じます。 Omgzlookを選ぶなら、絶対に後悔させません。あなたは君の初めてのAmazonのDOP-C01トレーニング費用認定試験を受ける時に認定試験に合格したいか。 OmgzlookのAmazonのDOP-C01トレーニング費用試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。
AWS Certified DevOps Engineer DOP-C01 」とゴーリキーは述べました。
AWS Certified DevOps Engineer DOP-C01トレーニング費用 - AWS Certified DevOps Engineer - Professional 常々、時間とお金ばかり効果がないです。 OmgzlookはあなたがAmazonのDOP-C01 受験資料更新版認定試験に合格する確保です。Omgzlook のトレーニング試験は問題と解答に含まれています。
Omgzlookは多くの受験生を助けて彼らにAmazonのDOP-C01トレーニング費用試験に合格させることができるのは我々専門的なチームがAmazonのDOP-C01トレーニング費用試験を研究して解答を詳しく分析しますから。試験が更新されているうちに、我々はAmazonのDOP-C01トレーニング費用試験の資料を更新し続けています。できるだけ100％の通過率を保証使用にしています。
Amazon DOP-C01トレーニング費用 - 暇の時間を利用して勉強します。
AmazonのDOP-C01トレーニング費用試験の認定はIT業種で欠くことができない認証です。では、どうやって、最も早い時間でAmazonのDOP-C01トレーニング費用認定試験に合格するのですか。Omgzlookは君にとって最高な選択になっています。OmgzlookのAmazonのDOP-C01トレーニング費用試験トレーニング資料はOmgzlookのIT専門家たちが研究して、実践して開発されたものです。その高い正確性は言うまでもありません。もし君はいささかな心配することがあるなら、あなたはうちの商品を購入する前に、Omgzlookは無料でサンプルを提供することができます。
多分、DOP-C01トレーニング費用テスト質問の数が伝統的な問題の数倍である。Amazon DOP-C01トレーニング費用試験参考書は全ての知識を含めて、全面的です。
DOP-C01 PDF DEMO:
QUESTION NO: 1
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
QUESTION NO: 2
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 3
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 4
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 5
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
OmgzlookのAmazonのEMC D-PVM-OE-23試験トレーニング資料は豊富な経験を持っている専門家が長年の研究を通じて開発されたものです。 AmazonのFortinet NSE6_WCS-7.0の認定試験に合格すれば、就職機会が多くなります。 AmazonのApple Apple-Device-Support-JPN試験ソフトを買ったあなたは一年間の無料更新サービスを得られて、AmazonのApple Apple-Device-Support-JPNの最新の問題集を了解して、試験の合格に自信を持つことができます。 Adobe AD0-E134 - あなたの全部な需要を満たすためにいつも頑張ります。 なぜ我々のAmazonのCisco 300-815ソフトに自信があるかと聞かれたら、まずは我々Omgzlookの豊富な経験があるチームです、次は弊社の商品を利用してAmazonのCisco 300-815試験に合格する多くのお客様です。
Updated: May 28, 2022