周りの多くの人は全部Cisco 350-401認証Pdf資料資格認定試験にパースしまして、彼らはどのようにできましたか。今には、あなたにOmgzlookを教えさせていただけませんか。我々社サイトのCisco 350-401認証Pdf資料問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのは350-401認証Pdf資料資格認定試験の成功にとって唯一の選択です。 現在の時代で高効率は避けられない話題ですから、速いスピードと高効率が我々の目標です。受験の皆さんは速く知識を理解して高い点数を取得できるようにOmgzlookは効率的なトレーニング資料をデザインしてさしあげます。 そうすれば、あなたは簡単に350-401認証Pdf資料復習教材のデモを無料でダウンロードできます。
CCNP Enterprise 350-401 」とゴーリキーは述べました。
OmgzlookのCiscoの350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)認証Pdf資料試験トレーニング資料はIT認証試験を受ける全ての受験生が試験に合格することを助けるもので、受験生からの良い評価をたくさんもらいました。 きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。
あなたの利用するCiscoの350-401認証Pdf資料ソフトが最新版のを保証するために、一年間の無料更新を提供します。人々は異なる目標がありますが、我々はあなたにCiscoの350-401認証Pdf資料試験に合格させるという同じ目標があります。この目標を達成するのは、あなたにとってIT分野での第一歩だけですが、我々のCiscoの350-401認証Pdf資料ソフトを開発するすべての意義です。
Cisco 350-401認証Pdf資料 - もちろんありますよ。
あなたに安心にネットでCiscoの350-401認証Pdf資料試験の資料を購入させるために、我々Omgzlookは国際の最大の安全的な支払システムPaypalと協力してあなたの支払の安全性を保障します。支払ってから、あなたは直ちにCiscoの350-401認証Pdf資料試験の資料をダウンロードすることができ、その後の一年間でCiscoの350-401認証Pdf資料試験ソフトが更新されたら、我々はあなたを通知します。Omgzlookを選ぶのは最高のサービスを選んだことです。
君がCiscoの350-401認証Pdf資料問題集を購入したら、私たちは一年間で無料更新サービスを提供することができます。もしCiscoの350-401認証Pdf資料問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
この目標を実現するようには、我が社のOmgzlookは試験改革のとともにめざましく推進していき、最も専門的なPegasystems PEGACPSA23V1-JPN問題集をリリースしています。 弊社のOmgzlookはIT認定試験のソフトの一番信頼たるバンドになるという目標を達成するために、弊社はあなたに最新版のCiscoのFortinet FCSS_SOC_AN-7.4試験問題集を提供いたします。 OmgzlookMicrosoft PL-500問題集は試験の範囲を広くカバーするだけでなく、質は高いです。 CompTIA N10-009 - これをよくできるために、我々は全日24時間のサービスを提供します。 人に引けをとりたくないあなたはCisco CompTIA CAS-004-JPN資格認定を取得したいですか。
Updated: May 28, 2022