時間とお金の集まりより正しい方法がもっと大切です。Ciscoの350-401日本語版参考資料試験のために勉強していますなら、Omgzlookの提供するCiscoの350-401日本語版参考資料試験ソフトはあなたの選びの最高です。我々の目的はあなたにCiscoの350-401日本語版参考資料試験に合格することだけです。 Ciscoの350-401日本語版参考資料問題集を購入したら、私たちは一年間で無料更新サービスを提供することができます。Omgzlookはきっとご存じしています。 Ciscoの350-401日本語版参考資料試験を準備しているあなたに試験に合格させるために、我々Omgzlookは模擬試験ソフトを更新し続けています。
CCNP Enterprise 350-401 我々のデモから感じられます。
現在IT技術会社に通勤しているあなたは、Ciscoの350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)日本語版参考資料試験認定を取得しましたか？350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)日本語版参考資料試験認定は給料の増加とジョブのプロモーションに役立ちます。 Ciscoの350-401 日本語的中対策試験にリラクスで合格するのも可能性があります。我々Omgzlookの提供するCiscoの350-401 日本語的中対策試験のソフトを利用した多くのお客様はこのような感じがあります。
人によって目標が違いますが、あなたにCisco 350-401日本語版参考資料試験に順調に合格できるのは我々の共同の目標です。この目標の達成はあなたがIT技術領域へ行く更なる発展の一歩ですけど、我々社Omgzlook存在するこそすべての意義です。だから、我々社は力の限りで弊社のCisco 350-401日本語版参考資料試験資料を改善し、改革の変更に応じて更新します。
全力を尽くせば、Cisco 350-401日本語版参考資料試験の合格も可能となります。
Omgzlookはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。Omgzlookは専門のIT業界での評判が高くて、あなたがインターネットでOmgzlookの部分のCisco 350-401日本語版参考資料「Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)」資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。
このほど、今のIT会社は多くのIT技術人材を急速に需要して、あなたはこのラッキーな人になりたいですか？Ciscoの350-401日本語版参考資料試験に参加するのはあなたに自身のレベルを高めさせるだけでなく、あなたがより良く就職し輝かしい未来を持っています。弊社OmgzlookはCiscoの350-401日本語版参考資料問題集を購入し勉強した後、あなたは350-401日本語版参考資料試験に合格することでできると信じています。
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
Microsoft DP-600J - Omgzlook を選択して１００％の合格率を確保することができて、もし試験に失敗したら、Omgzlookが全額で返金いたします。 ServiceNow CAD - 一年間の無料更新と試験に合格しなくて全額返金も我々の誠のアフタサーブすでございます。 IBM C1000-183 - そうしたらあなたはOmgzlookが用意した問題集にもっと自信があります。 Cisco SAP C-TFG51-2405資格試験に参加する意向があれば、当社のOmgzlookから自分に相応しい受験対策解説集を選らんで、認定試験の学習教材として勉強します。 OmgzlookにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってCisco Microsoft MB-820認証試験に参加する方に対して問題集を研究続けています。
Updated: May 28, 2022