自分の相応しい復習問題集バージョン（PDF版、ソフト版を、オンライン版）を選んで、ただ学習教材を勉強し、正確の答えを覚えるだけ、Cisco 350-401復習教材資格認定試験に一度で合格できます。人生は勝ち負けじゃない、負けたって言わない人が勝ちなのよ。近年Cisco 350-401復習教材認定試験の難度で大方の受験生は試験に合格しなかったのに面して、勇者のようにこのチャレンジをやってますか。 我々Omgzlookは一番効果的な方法を探してあなたにCiscoの350-401復習教材試験に合格させます。弊社のCiscoの350-401復習教材ソフトを購入するのを決めるとき、我々は各方面であなたに保障を提供します。 価格はちょっと高いですが、350-401復習教材試験に最も有効な参考書です。
CCNP Enterprise 350-401 できるだけ100％の通過率を保証使用にしています。
CCNP Enterprise 350-401復習教材 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) あなたにとても良い指導を確保できて、試験に合格するのを助けって、Omgzlookからすぐにあなたの通行証をとります。 ただ、社会に入るIT卒業生たちは自分能力の不足で、350-401 日本語復習赤本試験向けの仕事を探すのを悩んでいますか？それでは、弊社のCiscoの350-401 日本語復習赤本練習問題を選んで実用能力を速く高め、自分を充実させます。その結果、自信になる自己は面接のときに、面接官のいろいろな質問を気軽に回答できて、順調に350-401 日本語復習赤本向けの会社に入ります。
OmgzlookはきみのIT夢に向かって力になりますよ。Ciscoの350-401復習教材の認証そんなに人気があって、Omgzlookも君の試験に合格するために全力で助けてあげて、またあなたを一年の無料なサービスの更新を提供します。明日の成功のためにOmgzlookを選らばましょう。
Cisco 350-401復習教材 - 君の夢は1歩更に近くなります。
Ciscoの350-401復習教材の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。Ciscoの350-401復習教材の認定試験は君の実力を考察するテストでございます。
ITテストと認定は当面の競争が激しい世界でこれまで以上に重要になりました。それは異なる世界の未来を意味しています。
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
CIW 1D0-671 - あなたの全部な需要を満たすためにいつも頑張ります。 Omgzlookの勉強資料とCiscoのCompTIA PT0-002に関する指導を従えば、初めてCiscoのCompTIA PT0-002認定試験を受けるあなたでも一回で試験に合格することができます。 Omgzlookの専門家チームがCiscoのMicrosoft AZ-104-KR認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。 製品検定合格の証明書あるいは他の人気がある身分検定によって、Omgzlook CiscoのFortinet FCSS_ADA_AR-6.7試験トレーニング資料の長所を完璧に見せることができます。 EMC D-PCM-DY-23 - きっと君に失望させないと信じています。
Updated: May 28, 2022