時間が経つとともに、我々はインタネット時代に生活します。この時代にはIT資格認証を取得するは重要になります。それでは、350-401勉強資料試験に参加しよう人々は弊社Omgzlookの350-401勉強資料問題集を選らんで勉強して、一発合格して、CiscoIT資格証明書を受け取れます。 Ciscoの350-401勉強資料の認定試験は君の実力を考察するテストでございます。Ciscoの350-401勉強資料の認定試験に合格すれば、就職機会が多くなります。 弊社はあなたに相応しくて品質高い350-401勉強資料問題集を提供します。
CCNP Enterprise 350-401 」とゴーリキーは述べました。
弊社の350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)勉強資料試験問題集によって、あなたの心と精神の満足度を向上させながら、勉強した後350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)勉強資料試験資格認定書を受け取って努力する人生はすばらしいことであると認識られます。 あなたの夢は何ですか。あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。
Cisco 350-401勉強資料試験問題集を購買してから、一年間の無料更新を楽しみにしています。あなたにCisco 350-401勉強資料試験に関する最新かつ最完備の資料を勉強させ、試験に合格させることだと信じます。もしあなたは350-401勉強資料試験に合格しなかったら、全額返金のことを承諾します。
Cisco 350-401勉強資料 - もちろんありますよ。
Cisco 350-401勉強資料認定資格試験が難しいので、弊社の350-401勉強資料問題集はあなたに適当する認定資格試験問題集を見つけるし、本当の試験問題の難しさを克服することができます。弊社はCisco 350-401勉強資料認定試験の最新要求に従って関心を持って、全面的かつ高品質な模擬試験問題集を提供します。また、購入する前に、無料で350-401勉強資料のPDF版デモをダウンロードでき、信頼性を確認することができます。
君がCiscoの350-401勉強資料問題集を購入したら、私たちは一年間で無料更新サービスを提供することができます。もしCiscoの350-401勉強資料問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cisco 300-630 - 君が選んだのはOmgzlook、成功を選択したのに等しいです。 SAP C-THR81-2405 - もし弊社のソフトを使ってあなたは残念で試験に失敗したら、弊社は全額で返金することを保証いたします。 SAP C-S4CFI-2402 - Omgzlook を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。 Microsoft MS-900-KR - これをよくできるために、我々は全日24時間のサービスを提供します。 もしかすると君はほかのサイトもCiscoのPalo Alto Networks PCNSA認証試験に関する資料があるのを見つけた、比較したらOmgzlookが提供したのがいちばん全面的で品質が最高なことがわかりました。
Updated: May 28, 2022