多くの人々はMicrosoftの070-762赤本勉強試験に合格できるのは難しいことであると思っています。この悩みに対して、我々社OmgzlookはMicrosoftの070-762赤本勉強試験に準備するあなたに専門的なヘルプを与えられます。弊社のMicrosoftの070-762赤本勉強練習問題を利用したら、あなたは気楽に勉強するだけではなく、順調に試験に合格します。 試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。 弊社の高品質の試験問題集を通して、あなたにMicrosoft 070-762赤本勉強試験似合格させ、あなたのIT技能と職業生涯を新たなレベルに押し進めるのは我々の使命です。
MCP 070-762 「信仰は偉大な感情で、創造の力になれます。
MCP 070-762赤本勉強 - Developing SQL Databases 弊社の商品が好きなのは弊社のたのしいです。 IT業種で仕事しているあなたは、夢を達成するためにどんな方法を利用するつもりですか。実際には、IT認定試験を受験して認証資格を取るのは一つの良い方法です。
OmgzlookはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はOmgzlookが最高の知識源サイトと比較しますた。Omgzlookの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。
Microsoft 070-762赤本勉強 - 試験に失敗したら、全額で返金する承諾があります。
OmgzlookのMicrosoftの070-762赤本勉強「Developing SQL Databases」試験トレーニング資料はPDFぼ形式とソフトウェアの形式で提供して、OmgzlookのMicrosoftの070-762赤本勉強試験問題と解答に含まれています。070-762赤本勉強認定試験の真実の問題に会うかもしれません。そんな問題はパーフェクトと称するに足って、効果的な方法がありますから、どちらのMicrosoftの070-762赤本勉強試験に成功を取ることができます。OmgzlookのMicrosoftの070-762赤本勉強問題集は総合的にすべてのシラバスと複雑な問題をカバーしています。OmgzlookのMicrosoftの070-762赤本勉強テストの問題と解答は本物の試験の挑戦で、あなたのいつもの考え方を変換しなければなりません。
我々の提供するPDF版のMicrosoftの070-762赤本勉強試験の資料はあなたにいつでもどこでも読めさせます。我々もオンライン版とソフト版を提供します。
070-762 PDF DEMO:
QUESTION NO: 1
You have a reporting application that uses a table named Table1. You deploy a new batch update process to perform updates to Table1.
The environment is configured with the following properties:
* The database is configured with the default isolation setting.
* The application and process use the default transaction handling.
You observe the application cannot access any rows that are in use by the process.
You have the following requirements:
* Ensure the application is not blocked by the process.
* Ensure the application has a consistent view of the data
* Ensure the application does not read dirty data.
You need to resolve the issue and meet the requirements with the least amount of administrative effort.
What should you do?
A. Enable the database for the READ_COMITTED_SNAPSHOT isolation level.
B. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application and the update process for the SNAPSHOT isolation level.
C. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application for the SERIALIZABLE isolation level.
D. Enable the application for the WITH (NOLOCK) hint.
Answer: A
Explanation
Snapshot isolation must be enabled by setting the ALLOW_SNAPSHOT_ISOLATION ON database option before it is used in transactions. This activates the mechanism for storing row versions in the temporary database (tempdb).
READ COMMITTED is the default isolation level for SQL Server. It prevents dirty reads by specifying that statements cannot read data values that have been modified but not yet committed by other transactions. Other transactions can still modify, insert, or delete data between executions of individual statements within the current transaction, resulting in non-repeatable reads, or "phantom" data.
QUESTION NO: 2
You create tables by using the following Transact-SQL statements:
Each customer may have multiple addresses but only one is the primary address.
You must plan a solution that meets the following requirements:
* Return both customers and address information.
* Return only the primary address of the customer.
* Allow updates of all customer information and address details with the exception of the identity columns and the IsActive column.
Which three actions should you perform is sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION NO: 3
You are reviewing the execution plans in the query plan cache. You observe the following:
- There are a large number of single use plans.
- There are a large number of simple execution plans that use multiple CPU cores.
You need to configure the server to optimize query plan execution.
Which two setting should you modify on the properties page for the Microsoft SQL Server instance?
To answer, select the appropriate settings in the answer area.
Answer:
Explanation
* Optimize for ad hoc workloads
The optimize for ad hoc workloads option is used to improve the efficiency of the plan cache for workloads that contain many single use ad hoc batches. When this option is set to 1, the Database
Engine stores a small compiled plan stub in the plan cache when a batch is compiled for the first time, instead of the full compiled plan. This helps to relieve memory pressure by not allowing the plan cache to become filled with compiled plans that are not reused.
* Cost Threshold for Parallelism
Use the cost threshold for parallelism option to specify the threshold at which Microsoft SQL Server creates and runs parallel plans for queries. SQL Server creates and runs a parallel plan for a query only when the estimated cost to run a serial plan for the same query is higher than the value set in cost threshold for parallelism. The cost refers to an estimated elapsed time in seconds required to run the serial plan on a specific hardware configuration.
5 means 5 seconds, but is is 5 seconds on a machine internal to Microsoft from some time in the
1990s.
There's no way to relate it to execution time on your current machine, so we treat it as a pure number now.
Raising it to 50 is a common suggestion nowadays, so that more of your simpler queries run on a single thread.
QUESTION NO: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
You have a table that has a clustered index and a nonclustered index. The indexes use different columns from the table. You have a query named Users report that Query1 takes a long time to report results. You run and review the following statistics for an index seek operation:
You need to resolve the performance issue.
Solution: You rebuild the clustered index.
Does the solution meet the goal?
A. No
B. Yes
Answer: A
Explanation
The query uses the nonclustered index, so improving the clustered index will not help.
We should update statistics for the nonclustered index.
QUESTION NO: 5
Note: This question is part of a series of questions that present the same scenario. Each question in this series contains a unique solution. Determine whether the solution meets the stated goals.
The Account table was created by using the following Transact-SQL statement:
There are more than 1 billion records in the Account table. The Account Number column uniquely identifies each account. The ProductCode column has 100 different values. The values are evenly distributed in the table. Table statistics are refreshed and up to date.
You frequently run the following Transact-SQL SELECT statements:
You must avoid table scans when you run the queries.
You need to create one or more indexes for the table.
Solution: You run the following Transact-SQL statement:
CREATE CLUSTERED INDEX PK_Account ON Account(ProductCode);
Does the solution meet the goal?
A. No
B. Yes
Answer: A
Explanation
We need an index on the productCode column as well.
References: https://msdn.microsoft.com/en-us/library/ms190457.aspx
Huawei H19-338_V3.0 - あなたが任意の損失がないようにもし試験に合格しなければOmgzlookは全額で返金できます。 我々OmgzlookはMicrosoftのFortinet FCP_FCT_AD-7.2試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。 Network Appliance NS0-404 - あなた自身のために、証明書をもらいます。 たとえば、ベストセラーのMicrosoft Oracle 1z0-1042-24問題集は過去のデータを分析して作成ます。 SAP C-SIGDA-2403 - 現在のIT領域で競争が激しくなっていることは皆は良く知っていますから、みんなはIT認証を通じて自分の価値を高めたいです。
Updated: May 28, 2022