Omgzlookの専門家チームが君の需要を満たすために自分の経験と知識を利用してMicrosoftのAZ-220認定試験トレーリング認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。 うちの学習教材は君の認定試験に合格することに大変役に立ちます。OmgzlookのMicrosoftのAZ-220認定試験トレーリング試験トレーニング資料は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいるものです。 あなたに向いていることを確かめてから買うのも遅くないですよ。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 弊社の商品が好きなのは弊社のたのしいです。
Microsoft Certified: Azure IoT Developer Specialty AZ-220認定試験トレーリング - Microsoft Azure IoT Developer Omgzlookを選択したら、成功が遠くではありません。 Omgzlook を選択して１００％の合格率を確保することができて、もし試験に失敗したら、Omgzlookが全額で返金いたします。
あなたに予想外の良い効果を見せられますから。AZ-220認定試験トレーリング認定試験についてのことですが、Omgzlookは素晴らしい資質を持っていて、最も信頼できるソースになることができます。何千何万の登録された部門のフィードバックによって、それに大量な突っ込んだ分析を通じて、我々はどのサプライヤーがお客様にもっと新しいかつ高品質のAZ-220認定試験トレーリング資料を提供できるかを確かめる存在です。
Microsoft AZ-220認定試験トレーリング - Omgzlookを選んだら、成功への扉を開きます。
AZ-220認定試験トレーリング認定試験の準備をするために一生懸命勉強して疲れを感じるときには、他の人が何をしているかを知っていますか。あなたと同じIT認定試験を受験する周りの人を見てください。あなたが試験のために不安と感じているとき、どうして他の人が自信満々で、のんびり見ているのでしょうか。あなたの能力は彼らうより弱いですか。もちろんそんなことはないです。では、なぜ他の人が簡単にAZ-220認定試験トレーリング試験に合格することができるかを知りたいですか。それは彼らがOmgzlook のAZ-220認定試験トレーリング問題集を利用したからです。この問題集を勉強することだけで楽に試験に合格することができます。信じないのですか。不思議を思っていますか。では、急いで試してください。まず問題集のdemoを体験することができます。そうすれば、この問題集の品質を確認することができます。はやくOmgzlookのサイトをクリックしてください。
IT技術の急速な発展につれて、IT認証試験の問題は常に変更されています。したがって、OmgzlookのAZ-220認定試験トレーリング問題集も絶えずに更新されています。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 2
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 3
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 4
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
IBM S2000-024 - もし試験に準備するときに良いツールを使えば、多くの時間を節約することができるだけでなく、楽に試験に合格する保障を手にすることもできます。 あるいは、無料で試験EMC D-MSS-DS-23問題集を更新してあげるのを選択することもできます。 ISC CISSP-KR - 学習教材がどんな問題があっても、あるいは君の試験を失敗したら、私たちは全額返金するのを保証いたします。 Microsoft MB-800 - なぜ受験生のほとんどはOmgzlookを選んだのですか。 Omgzlookは君の早くMicrosoftのFortinet NSE7_EFW-7.2認定試験に合格するために、きみのもっと輝い未来のために、君の他人に羨ましいほど給料のために、ずっと努力しています。
Updated: May 28, 2022