OmgzlookのMicrosoftのAZ-220試験関連赤本試験トレーニング資料を使ったら、君のMicrosoftのAZ-220試験関連赤本認定試験に合格するという夢が叶えます。なぜなら、それはMicrosoftのAZ-220試験関連赤本認定試験に関する必要なものを含まれるからです。Omgzlookを選んだら、あなたは簡単に認定試験に合格することができますし、あなたはITエリートたちの一人になることもできます。 Omgzlookの学習教材は君の初めての試しでMicrosoftのAZ-220試験関連赤本認定試験に合格するのに助けます。OmgzlookのMicrosoftのAZ-220試験関連赤本試験トレーニング資料を利用すれば、認定試験に合格するのは簡単になります。 それは正確性が高くて、カバー率も広いです。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 準備の段階であなたはリーダーしています。
あなたにMicrosoft AZ-220 - Microsoft Azure IoT Developer試験関連赤本試験に関する最新かつ最完備の資料を勉強させ、試験に合格させることだと信じます。 幸せの生活は自分で作られて得ることです。だから、大人気なIT仕事に従事したいあなたは今から準備して努力するのではないでしょうか？さあ、ここで我々社のMicrosoftのAZ-220 関連日本語内容試験模擬問題を推薦させてくださいませんか。
周りの多くの人は全部Microsoft AZ-220試験関連赤本資格認定試験にパースしまして、彼らはどのようにできましたか。今には、あなたにOmgzlookを教えさせていただけませんか。我々社サイトのMicrosoft AZ-220試験関連赤本問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのはAZ-220試験関連赤本資格認定試験の成功にとって唯一の選択です。
Microsoft AZ-220試験関連赤本 - もし合格しないと、われは全額で返金いたします。
私たちの会社は、コンテンツだけでなくディスプレイ上でも、AZ-220試験関連赤本試験材料の設計に最新の技術を採用しています。激しく変化する世界に対応し、私たちのAZ-220試験関連赤本試験資料のガイドで、あなたの長所を発揮することができます。 また、あなたも私たちのAZ-220試験関連赤本試験資料を使って、個人的に重要な知識を集約し、自分の需要によって、AZ-220試験関連赤本試験のために様々な勉強方法を選ぶことができます。
Microsoft AZ-220試験関連赤本「Microsoft Azure IoT Developer」認証試験に合格することが簡単ではなくて、Microsoft AZ-220試験関連赤本証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
EMC D-PVM-DS-23 - 弊社のIT技術専門家たち は質が高い問題集と答えを提供し、お客様が合格できるように努めています。 Microsoft AZ-104 - 今の社会の中で、ネット上で訓練は普及して、弊社は試験問題集を提供する多くのネットの一つでございます。 MicrosoftのEMC D-SF-A-24認定試験はIT専門知識のレベルの考察として、とっても重要な地位になりつつます。 Cisco 200-301-KR - 試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。 受験者はOmgzlookが提供した資料を利用してVMware 3V0-42.23認証試験は問題にならないだけでなく、高い点数も合格することができます。
Updated: May 28, 2022