我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。MicrosoftのAZ-220試験関連赤本の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのMicrosoftのAZ-220試験関連赤本試験に一番信頼できるヘルプを提供します。MicrosoftのAZ-220試験関連赤本試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。 Omgzlookがあなたのヘルパーで、Omgzlookを手に入れたら、半分の労力でも二倍の効果を得ることができます。Omgzlook MicrosoftのAZ-220試験関連赤本試験スタディガイドはあなたのキャリアの灯台になれます。 社会と経済の発展につれて、多くの人はIT技術を勉強します。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 しようがないわけではないです。
Microsoft Certified: Azure IoT Developer Specialty AZ-220試験関連赤本 - Microsoft Azure IoT Developer 今の社会の中で、ネット上で訓練は普及して、弊社は試験問題集を提供する多くのネットの一つでございます。 それはOmgzlookがすごく便利で、広い通用性があるからです。OmgzlookのITエリートたちは彼らの専門的な目で、最新的なMicrosoftのAZ-220 テスト内容試験トレーニング資料に注目していて、うちのMicrosoftのAZ-220 テスト内容問題集の高い正確性を保証するのです。
試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。Omgzlookは実際の環境で本格的なMicrosoftのAZ-220試験関連赤本「Microsoft Azure IoT Developer」の試験の準備過程を提供しています。
Microsoft AZ-220試験関連赤本 - 夢を持ったら実現するために頑張ってください。
あなたは今MicrosoftのAZ-220試験関連赤本試験のために準備していますか。そうであれば、あなたは夢がある人だと思います。我々Omgzlookはあなたのような人に夢を叶えさせるという目標を持っています。我々の開発するMicrosoftのAZ-220試験関連赤本ソフトは最新で最も豊富な問題集を含めています。あなたは我々の商品を購入したら、一年間の無料更新サービスを得られています。我々のソフトを利用してMicrosoftのAZ-220試験関連赤本試験に合格するのは全然問題ないです。
きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
我々OmgzlookのITエリートと我々のMicrosoftのAdobe AD0-E126試験のソフトに満足するお客様は我々に自信を持たせます。 OmgzlookのAxis CTS教材を購入したら、あなたは一年間の無料アップデートサービスを取得しました。 SAP C-TFG51-2405 - 購入したい意向があれば、我々Omgzlookのホームページをご覧になってください。 CompTIA 220-1101認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。 試験に合格したお客様は「Palo Alto Networks NetSec-Generalist問題集のオンライン版を利用して、模擬試験を繰り返して受けました。
Updated: May 28, 2022