我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。Omgzlook MicrosoftのAZ-220試験準備試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れないAZ-220試験準備勉強資料を提供するというサイトがあるかもしれませんが、Omgzlookはあなたに高品質かつ最新のMicrosoftのAZ-220試験準備トレーニング資料を提供するユニークなサイトです。 我々が決まったことを完璧に作るためにすべての不要な機会を諦めなければなりません。第三、我々は確かに最高の製品を持っていますが、粗悪品の方式で表示されたら、もちろん粗悪品と見られますから、我々は自分の製品を創造的かつプロの方法で見せます。 ためらわずに速くあなたのショッピングカートに入れてください。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 それでも恐れることはありません。
それは OmgzlookのAZ-220 - Microsoft Azure IoT Developer試験準備問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。 皆さんからいろいろな好評をもらいました。しかも、Omgzlookは当面の市場で皆さんが一番信頼できるサイトです。
Microsoftの認証資格は最近ますます人気になっていますね。国際的に認可された資格として、Microsoftの認定試験を受ける人も多くなっています。その中で、AZ-220試験準備認定試験は最も重要な一つです。
Microsoft AZ-220試験準備 - それは正確性が高くて、カバー率も広いです。
あなたはMicrosoftのAZ-220試験準備試験への努力を通して満足的な結果を得られているのは我々Omgzlookの希望です。信じられないなら、弊社のデモをやってみて、MicrosoftのAZ-220試験準備試験問題集を体験することができます。試して我々専門家たちの真面目さを感じられています。MicrosoftのAZ-220試験準備試験のほかの試験に参加するつもりでしたら、あなたも弊社のOmgzlookでふさわしいソフトを探すことができます。あなたは満足できると信じています。
我々はあなたに提供するのは最新で一番全面的なMicrosoftのAZ-220試験準備問題集で、最も安全な購入保障で、最もタイムリーなMicrosoftのAZ-220試験準備試験のソフトウェアの更新です。無料デモはあなたに安心で購入して、購入した後1年間の無料MicrosoftのAZ-220試験準備試験の更新はあなたに安心で試験を準備することができます、あなたは確実に購入を休ませることができます私たちのソフトウェアを試してみてください。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 2
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 3
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 4
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 5
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
無料デモはあなたに安心で購入して、購入した後1年間の無料MicrosoftのMicrosoft AI-900試験の更新はあなたに安心で試験を準備することができます、あなたは確実に購入を休ませることができます私たちのソフトウェアを試してみてください。 MicrosoftのMicrosoft MB-910試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。 MicrosoftのVMware 5V0-63.23試験に合格するのは難しいですが、合格できるのはあなたの能力を証明できるだけでなく、国際的な認可を得られます。 Lpi 306-300 - 社会と経済の発展につれて、多くの人はIT技術を勉強します。 我々Omgzlookの提供するMicrosoftのJuniper JN0-637試験のソフトは豊富な試験に関する資源を含めてあなたに最も真実のMicrosoftのJuniper JN0-637試験環境で体験させます。
Updated: May 28, 2022