有効的なMicrosoft AZ-220試験感想認定資格試験問題集を見つけられるのは資格試験にとって重要なのです。我々OmgzlookのMicrosoft AZ-220試験感想試験問題と試験解答の正確さは、あなたの試験準備をより簡単にし、あなたが試験に高いポイントを得ることを保証します。Microsoft AZ-220試験感想資格試験に参加する意向があれば、当社のOmgzlookから自分に相応しい受験対策解説集を選らんで、認定試験の学習教材として勉強します。 Omgzlookはまた一年間に無料なサービスを更新いたします。OmgzlookにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってMicrosoft AZ-220試験感想認証試験に参加する方に対して問題集を研究続けています。 今まで、たくさんのお客様はMicrosoft AZ-220試験感想試験参考資料に満足しています。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 Omgzlookには専門的なエリート団体があります。
Omgzlookは高品質の学習資料をあなたを助けて優秀なMicrosoftのAZ-220 - Microsoft Azure IoT Developer試験感想会員の認証を得て、もしあなたはMicrosoft AZ-220 - Microsoft Azure IoT Developer試験感想の認証試験を通して自分を高めるの選択を下ろして、Omgzlookはとてもよい選択だと思います。 試験の目標が変わる限り、あるいは我々の勉強資料が変わる限り、すぐに更新して差し上げます。あなたのニーズをよく知っていていますから、あなたに試験に合格する自信を与えます。
きみはMicrosoftのAZ-220試験感想認定テストに合格するためにたくさんのルートを選択肢があります。Omgzlookは君のために良い訓練ツールを提供し、君のMicrosoft認証試に高品質の参考資料を提供しいたします。あなたの全部な需要を満たすためにいつも頑張ります。
Microsoft AZ-220試験感想 - Omgzlookを選んだら、成功への扉を開きます。
AZ-220試験感想認定試験は専門知識と情報技術を検査する試験で、Omgzlookが一日早くMicrosoftのAZ-220試験感想認定試験「Microsoft Azure IoT Developer」に合格させるのサイトで試験の前に弊社が提供する訓練練習問題をテストして、短い時間であなたの収穫が大きいです。
したがって、OmgzlookのAZ-220試験感想問題集も絶えずに更新されています。それに、Omgzlookの教材を購入すれば、Omgzlookは一年間の無料アップデート・サービスを提供してあげます。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 2
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 3
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 4
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
SASInstitute A00-485 - 試験に合格するのは簡単ではないもよくわかりましょう。 OmgzlookのHuawei H19-315-ENU問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。 GitHub GitHub-Foundations - そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。 OmgzlookのITエリートたちは彼らの専門的な目で、最新的なMicrosoftのEMC D-DS-OP-23試験トレーニング資料に注目していて、うちのMicrosoftのEMC D-DS-OP-23問題集の高い正確性を保証するのです。 Omgzlook はあなたに最新の試験研究資料を提供しますから、Omgzlook MicrosoftのSAP C_LCNC_2406問題集を持っていたら、試験に直面する自信に満ちることができ、合格しないなんて全然心配することはなく気楽に試験に受かることができます。
Updated: May 28, 2022