時間とお金の集まりより正しい方法がもっと大切です。MicrosoftのAZ-220練習問題集試験のために勉強していますなら、Omgzlookの提供するMicrosoftのAZ-220練習問題集試験ソフトはあなたの選びの最高です。我々の目的はあなたにMicrosoftのAZ-220練習問題集試験に合格することだけです。 弊社のOmgzlookで無料でMicrosoftのAZ-220練習問題集ソフトのデモを直ちにダウンロードできます。MicrosoftのAZ-220練習問題集ソフトを利用してこのソフトはあなたの愛用するものになることを信じています。 MicrosoftのAZ-220練習問題集試験を準備しているあなたに試験に合格させるために、我々Omgzlookは模擬試験ソフトを更新し続けています。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 でも、成功へのショートカットがを見つけました。
購入した前の無料の試み、購入するときのお支払いへの保障、購入した一年間の無料更新MicrosoftのAZ-220 - Microsoft Azure IoT Developer練習問題集試験に失敗した全額での返金…これらは我々のお客様への承諾です。 しかも１００パーセントの合格率を保証できます。OmgzlookのMicrosoftのAZ-220 学習範囲試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。
Omgzlookは多くの受験生を助けて彼らにMicrosoftのAZ-220練習問題集試験に合格させることができるのは我々専門的なチームがMicrosoftのAZ-220練習問題集試験を研究して解答を詳しく分析しますから。試験が更新されているうちに、我々はMicrosoftのAZ-220練習問題集試験の資料を更新し続けています。できるだけ100％の通過率を保証使用にしています。
Microsoft AZ-220練習問題集 - きっと君に失望させないと信じています。
このインターネット時代において、社会の発展とともに、コストがより低くて内容が完全な情報が不可欠です。弊社のAZ-220練習問題集問題集は他のサイトに比べて、試験の範囲をカバーすることはより広くて、合理的な価格があります。しかしも、品質はもっと高くて一度AZ-220練習問題集試験に合格したい客様に対して、我が社のAZ-220練習問題集はあなたの最高選択かつ成功のショートカットであると思われます。
我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。Omgzlook MicrosoftのAZ-220練習問題集試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
また、我々はさらに認可を受けられるために、皆様の一切の要求を満足できて喜ぶ気持ちでずっと協力し、完備かつ精確のCompTIA SY0-701-JPN試験問題集を開発するのに準備します。 CWNP CWT-101 - ためらわずに速くあなたのショッピングカートに入れてください。 あなたは弊社の商品を使用した後、一回でMicrosoft ATLASSIAN ACP-120試験に合格できなかったら、弊社は全額返金することを承諾します。 OmgzlookのMicrosoftのH3C GB0-372-ENU試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。 あなたのMicrosoft Linux Foundation FOCP試験に合格するのは我々が与えるサプライズです。
Updated: May 28, 2022