AZ-220的中問題集試験資料の3つのバージョンのなかで、PDFバージョンのAZ-220的中問題集トレーニングガイドは、ダウンロードと印刷でき、受験者のために特に用意されています。携帯電話にブラウザをインストールでき、 私たちのAZ-220的中問題集試験資料のApp版を使用することもできます。 PC版は、実際の試験環境を模擬し、Windowsシステムのコンピュータに適します。 ほんとんどお客様は我々OmgzlookのMicrosoft AZ-220的中問題集問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。競争力が激しい社会に当たり、我々Omgzlookは多くの受験生の中で大人気があるのは受験生の立場からMicrosoft AZ-220的中問題集試験資料をリリースすることです。 しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
AZ-220的中問題集認定試験に合格することは難しいようですね。
Microsoft Certified: Azure IoT Developer Specialty AZ-220的中問題集 - Microsoft Azure IoT Developer IT認定試験の出題範囲に対して、Omgzlookは豊富な経験を持っています。 ここには、私たちは君の需要に応じます。OmgzlookのMicrosoftのAZ-220 日本語版問題集問題集を購入したら、私たちは君のために、一年間無料で更新サービスを提供することができます。
この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、OmgzlookのAZ-220的中問題集問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。
Microsoft AZ-220的中問題集 - それをもって、試験は問題になりませんよ。
OmgzlookのAZ-220的中問題集問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。もしこの問題集を利用してからやはり試験に不合格になってしまえば、Omgzlookは全額で返金することができます。あるいは、無料で試験AZ-220的中問題集問題集を更新してあげるのを選択することもできます。こんな保障がありますから、心配する必要は全然ないですよ。
Omgzlookはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、Omgzlookを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。
AZ-220 PDF DEMO:
QUESTION NO: 1
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 2
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 3
You have three Azure IoT hubs named Hub1, Hub2, and Hub3, a Device Provisioning Service instance, and an IoT device named Device1.
Each IoT hub is deployed to a separate Azure region. Device enrollment uses the Lowest latency allocation policy.
The Device Provisioning Service uses the Lowest latency allocation policy. Device1 is auto-provisioned to Hub1 by using the Device Provisioning Service. Device1 regularly moves between regions.
You need to ensure that Device1 always connects to the IoT hub that has the lowest latency. What should you do?
A. Configure the re-provisioning policy.
B. Implement device certificate rolling.
C. Disenroll and reenroll Device1.
D. Configure device attestation that uses X.509 certificates.
Answer: A
Explanation:
Automated re-provisioning support.
Microsoft added first-class support for device re-provisioning which allows devices to be reassigned to a different IoT solution sometime after the initial solution assignment. Re-provisioning support is available in two options:
Factory reset, in which the device twin data for the new IoT hub is populated from the enrollment list instead of the old IoT hub. This is common for factory reset scenarios as well as leased device scenarios. Migration, in which device twin data is moved from the old IoT hub to the new IoT hub.
This is common for scenarios in which a device is moving between geographies.
Reference:
https://azure.microsoft.com/en-us/blog/new-year-newly-available-iot-hub-device-provisioning- service-features/
QUESTION NO: 4
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 5
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
OmgzlookのITエリートたちは彼らの専門的な目で、最新的なMicrosoftのIIA IIA-CIA-Part2-CN試験トレーニング資料に注目していて、うちのMicrosoftのIIA IIA-CIA-Part2-CN問題集の高い正確性を保証するのです。 Amazon SAA-C03-KR - それはOmgzlookが提供する問題資料は絶対あなたが試験に受かることを助けられるからです。 MicrosoftのOracle 1z0-1085-24認定試験に合格することはきっと君の職業生涯の輝い将来に大変役に立ちます。 Omgzlook MicrosoftのMicrosoft AZ-900-JPN試験問題集はあなたが自分の目標を達成することを助けられます。 我々Omgzlookは一番効果的な方法を探してあなたにMicrosoftのECCouncil 212-82試験に合格させます。
Updated: May 28, 2022