IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてMicrosoftのAZ-220的中合格問題集試験に参加して認可を得たくて、Microsoft のAZ-220的中合格問題集試験が難度の高いので合格率も比較的低いです。Omgzlookの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。 我々Omgzlookは一番効果的な方法を探してあなたにMicrosoftのAZ-220的中合格問題集試験に合格させます。弊社のMicrosoftのAZ-220的中合格問題集ソフトを購入するのを決めるとき、我々は各方面であなたに保障を提供します。 もっと長い時間をもらって試験を準備したいのなら、あなたがいつでもサブスクリプションの期間を伸びることができます。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 早速買いに行きましょう。
次のジョブプロモーション、プロジェクタとチャンスを申し込むとき、Microsoft AZ-220 - Microsoft Azure IoT Developer的中合格問題集資格認定はライバルに先立つのを助け、あなたの大業を成し遂げられます。 それは正確性が高くて、カバー率も広いです。あなたはOmgzlookの学習教材を購入した後、私たちは一年間で無料更新サービスを提供することができます。
つまりAZ-220的中合格問題集練習問題はあなたの最も正しい選択です。あなたは今やはりAZ-220的中合格問題集試験に悩まされていますか？長い時間AZ-220的中合格問題集試験を取り組んいる弊社はあなたにAZ-220的中合格問題集練習問題を提供できます。あなたはAZ-220的中合格問題集試験に興味を持たれば、今から行動し、AZ-220的中合格問題集練習問題を買いましょう。
Microsoft AZ-220的中合格問題集復習教材は有効的な資料です。
我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。MicrosoftのAZ-220的中合格問題集の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのMicrosoftのAZ-220的中合格問題集試験に一番信頼できるヘルプを提供します。MicrosoftのAZ-220的中合格問題集試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。
あなたはその他のMicrosoft AZ-220的中合格問題集「Microsoft Azure IoT Developer」認証試験に関するツールサイトでも見るかも知れませんが、弊社はIT業界の中で重要な地位があって、Omgzlookの問題集は君に100%で合格させることと君のキャリアに変らせることだけでなく一年間中で無料でサービスを提供することもできます。
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
SAP C_ARCIG_2404 - 社会と経済の発展につれて、多くの人はIT技術を勉強します。 Omgzlookを通じて最新のMicrosoftのJuniper JN0-649試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。 あなたにMicrosoft HP HP2-I63試験に関する最新かつ最完備の資料を勉強させ、試験に合格させることだと信じます。 Salesforce Data-Cloud-Consultant - Omgzlook を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。 周りの多くの人は全部Microsoft SAP P-S4FIN-2023資格認定試験にパースしまして、彼らはどのようにできましたか。
Updated: May 28, 2022