あなた自身のために、証明書をもらいます。Omgzlook はあなたに必要とした知識と経験を提供して、MicrosoftのAZ-220最新受験攻略試験の目標を作ってあげました。Omgzlookを利用したら、試験に合格しないことは絶対ないです。 たとえば、ベストセラーのMicrosoft AZ-220最新受験攻略問題集は過去のデータを分析して作成ます。ほんとんどお客様は我々OmgzlookのMicrosoft AZ-220最新受験攻略問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。 現在のIT領域で競争が激しくなっていることは皆は良く知っていますから、みんなはIT認証を通じて自分の価値を高めたいです。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 Omgzlookを信頼してください。
Microsoft Certified: Azure IoT Developer Specialty AZ-220最新受験攻略 - Microsoft Azure IoT Developer Omgzlookは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。 したがって、OmgzlookのAZ-220 受験記対策問題集も絶えずに更新されています。それに、Omgzlookの教材を購入すれば、Omgzlookは一年間の無料アップデート・サービスを提供してあげます。
MicrosoftのAZ-220最新受験攻略試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でOmgzlookは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。
Microsoft AZ-220最新受験攻略 - 弊社の商品が好きなのは弊社のたのしいです。
Omgzlookを選択したら、成功が遠くではありません。Omgzlookが提供するMicrosoftのAZ-220最新受験攻略認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。
Omgzlook を選択して１００％の合格率を確保することができて、もし試験に失敗したら、Omgzlookが全額で返金いたします。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 2
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
EMC D-PCM-DY-23 - あなたに予想外の良い効果を見せられますから。 あなたはインターネットでMicrosoftのFortinet FCP_FWF_AD-7.4認証試験の練習問題と解答の試用版を無料でダウンロードしてください。 Salesforce Salesforce-Hyperautomation-Specialist - Omgzlookは我々が研究したトレーニング資料を無料に更新します。 Microsoft MS-721 - Omgzlookはまた一年間に無料なサービスを更新いたします。 そうしたらOmgzlookのMicrosoftのNetwork Appliance NS0-701試験に合格することができるようになります。
Updated: May 28, 2022