あなたに提供するソフトはその中の一部です。なぜ弊社は試験に失敗したら全額で返金することを承諾していますか。弊社のMicrosoftのAZ-220復習問題集ソフトを通してほとんどの人が試験に合格したのは我々の自信のある原因です。 あなたはいつでもサブスクリプションの期間を延長することができますから、より多くの時間を取って充分に試験を準備できます。Omgzlookというサイトのトレーニング資料を利用するかどうかがまだ決まっていなかったら、Omgzlookのウェブで一部の試験問題と解答を無料にダウンローしてみることができます。 MicrosoftのAZ-220復習問題集試験が更新するとともに我々の作成するソフトは更新しています。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 あなたは一年間での更新サービスを楽しみにします。
AZ-220 - Microsoft Azure IoT Developer復習問題集認定試験に合格することは難しいようですね。 我々社の練習問題は長年でAZ-220 最新試験全真模擬試験トレーニング資料に研究している専業化チームによって編集されます。Microsoft AZ-220 最新試験資格問題集はPDF版、ソフト版、オンライン版を含まれ、この三つバージョンから自分の愛用することを選んでいます。
ここには、私たちは君の需要に応じます。OmgzlookのMicrosoftのAZ-220復習問題集問題集を購入したら、私たちは君のために、一年間無料で更新サービスを提供することができます。もし不合格になったら、私たちは全額返金することを保証します。
Microsoft AZ-220復習問題集 - もし弊社の問題集を勉強してそれは簡単になります。
時間とお金の集まりより正しい方法がもっと大切です。MicrosoftのAZ-220復習問題集試験のために勉強していますなら、Omgzlookの提供するMicrosoftのAZ-220復習問題集試験ソフトはあなたの選びの最高です。我々の目的はあなたにMicrosoftのAZ-220復習問題集試験に合格することだけです。試験に失敗したら、弊社は全額で返金します。我々の誠意を信じてください。あなたが順調に試験に合格するように。
弊社の資料を使って、１００％に合格を保証いたします。OmgzlookはIT試験問題集を提供するウエブダイトで、ここによく分かります。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 2
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
MicrosoftのMicrosoft AZ-700J試験を準備しているあなたに試験に合格させるために、我々Omgzlookは模擬試験ソフトを更新し続けています。 多くのMicrosoftのCompTIA N10-009認定試験を準備している受験生がいろいろなCompTIA N10-009「Microsoft Azure IoT Developer」認証試験についてサービスを提供するサイトオンラインがみつけたがOmgzlookはIT業界トップの専門家が研究した参考材料で権威性が高く、品質の高い教育資料で、一回に参加する受験者も合格するのを確保いたします。 Juniper JN0-637 - 世の中に去年の自分より今年の自分が優れていないのは立派な恥です。 MicrosoftのEMC D-PDC-DY-23認定試験に合格するためにたくさん方法があって、非常に少ないの時間とお金を使いのは最高で、Omgzlookが対応性の訓練が提供いたします。 現在IT技術会社に通勤しているあなたは、MicrosoftのSAP C-TS422-2023試験認定を取得しましたか？SAP C-TS422-2023試験認定は給料の増加とジョブのプロモーションに役立ちます。
Updated: May 28, 2022