MicrosoftのAZ-220問題無料試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でOmgzlookは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。 OmgzlookのMicrosoftのAZ-220問題無料試験トレーニング資料の値段は手頃で、IT認証の受験生のみなさんによく適用します。OmgzlookのMicrosoftのAZ-220問題無料試験資料は同じシラバスに従って研究されたのです。 Omgzlookはあなたの夢に実現させるサイトでございます。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 Omgzlookを選んび、成功を選びます。
Omgzlookの試験トレーニング資料はMicrosoftのAZ-220 - Microsoft Azure IoT Developer問題無料認定試験の１００パーセントの合格率を保証します。 その権威性は言うまでもありません。うちのMicrosoftのAZ-220 合格内容試験トレーニング資料を購入する前に、Omgzlookのサイトで、一部分のフリーな試験問題と解答をダンロードでき、試用してみます。
Omgzlookで、あなたの試験のためのテクニックと勉強資料を見つけることができます。OmgzlookのMicrosoftのAZ-220問題無料試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。Omgzlookに会ったら、最高のトレーニング資料を見つけました。
Microsoft AZ-220問題無料 - そうだったら、下記のものを読んでください。
あなたはMicrosoftのAZ-220問題無料の資料を探すのに悩んでいますか。心配しないでください。私たちを見つけるのはあなたのMicrosoftのAZ-220問題無料試験に合格する保障からです。数年以来IT認証試験のためのソフトを開発している我々Omgzlookチームは国際的に大好評を博しています。我々はMicrosoftのAZ-220問題無料のような重要な試験を準備しているあなたに一番全面的で有効なヘルプを提供します。
ここには、私たちは君の需要に応じます。OmgzlookのMicrosoftのAZ-220問題無料問題集を購入したら、私たちは君のために、一年間無料で更新サービスを提供することができます。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 4
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 5
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
あなたにMicrosoftのEMC D-PEMX-DY-23試験のソフトの更新情況を了解させます。 うちのMicrosoftのIBM C1000-178試験トレーニング資料を購入する前に、Omgzlookのサイトで、一部分のフリーな試験問題と解答をダンロードでき、試用してみます。 IT技術人員にとって、両親にあなたの仕事などの問題を危ぶんでいきませんか？高い月給がある仕事に従事したいですか？美しい未来を有したいですか？だから、我々OmgzlookのIBM C1000-181問題集をご覧になってください。 Microsoft MB-910 - 我々の誠意を信じてください。 もし無事にCIW 1D0-720試験に合格したら、あなたはもっと自信になって、更なる勇気でやりたいことをしています。
Updated: May 28, 2022