今の多くのIT者が参加している試験に、MicrosoftのAZ-220問題トレーリング認定試験「Microsoft Azure IoT Developer」がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。MicrosoftのAZ-220問題トレーリング認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。Omgzlookは君のもっともよい選択ですよ。 Omgzlookはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。Omgzlookは専門のIT業界での評判が高くて、あなたがインターネットでOmgzlookの部分のMicrosoft AZ-220問題トレーリング「Microsoft Azure IoT Developer」資料を無料でダウンロードして、弊社の正確率を確認してください。 Omgzlookが提供するMicrosoftのAZ-220問題トレーリング認証試験問題集が君の試験に合格させます。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 どんなツールかと聞きたいでしょう。
あるいは、無料で試験AZ-220 - Microsoft Azure IoT Developer問題トレーリング問題集を更新してあげるのを選択することもできます。 OmgzlookはMicrosoftのAZ-220 認定試験試験の最新の問題集を提供するの専門的なサイトです。MicrosoftのAZ-220 認定試験問題集はAZ-220 認定試験に関する問題をほとんど含まれます。
なぜ受験生のほとんどはOmgzlookを選んだのですか。それはOmgzlookがすごく便利で、広い通用性があるからです。OmgzlookのITエリートたちは彼らの専門的な目で、最新的なMicrosoftのAZ-220問題トレーリング試験トレーニング資料に注目していて、うちのMicrosoftのAZ-220問題トレーリング問題集の高い正確性を保証するのです。
Microsoft AZ-220問題トレーリング - 常々、時間とお金ばかり効果がないです。
我々は販売者とお客様の間の信頼が重要でもらい難いのを知っています。我々はMicrosoftのAZ-220問題トレーリングソフトであなたに専門と高効率を示して、最全面的な問題集と詳しい分析であなたに助けてMicrosoftのAZ-220問題トレーリング試験に合格して、最高のサービスであなたの信頼を得ています。あなたが試験に合格するのは我々への一番よい評価です。
できるだけ100％の通過率を保証使用にしています。Omgzlookは多くの受験生を助けて彼らにMicrosoftのAZ-220問題トレーリング試験に合格させることができるのは我々専門的なチームがMicrosoftのAZ-220問題トレーリング試験を研究して解答を詳しく分析しますから。
AZ-220 PDF DEMO:
QUESTION NO: 1
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 2
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 3
You have three Azure IoT hubs named Hub1, Hub2, and Hub3, a Device Provisioning Service instance, and an IoT device named Device1.
Each IoT hub is deployed to a separate Azure region. Device enrollment uses the Lowest latency allocation policy.
The Device Provisioning Service uses the Lowest latency allocation policy. Device1 is auto-provisioned to Hub1 by using the Device Provisioning Service. Device1 regularly moves between regions.
You need to ensure that Device1 always connects to the IoT hub that has the lowest latency. What should you do?
A. Configure the re-provisioning policy.
B. Implement device certificate rolling.
C. Disenroll and reenroll Device1.
D. Configure device attestation that uses X.509 certificates.
Answer: A
Explanation:
Automated re-provisioning support.
Microsoft added first-class support for device re-provisioning which allows devices to be reassigned to a different IoT solution sometime after the initial solution assignment. Re-provisioning support is available in two options:
Factory reset, in which the device twin data for the new IoT hub is populated from the enrollment list instead of the old IoT hub. This is common for factory reset scenarios as well as leased device scenarios. Migration, in which device twin data is moved from the old IoT hub to the new IoT hub.
This is common for scenarios in which a device is moving between geographies.
Reference:
https://azure.microsoft.com/en-us/blog/new-year-newly-available-iot-hub-device-provisioning- service-features/
QUESTION NO: 4
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 5
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
その中の一部は暇な時間だけでMicrosoftのMicrosoft DP-600J試験を準備します。 ただ、社会に入るIT卒業生たちは自分能力の不足で、ISC CCSP試験向けの仕事を探すのを悩んでいますか？それでは、弊社のMicrosoftのISC CCSP練習問題を選んで実用能力を速く高め、自分を充実させます。 あなたに安心にMicrosoftのIBM C1000-191ソフトを購入させるために、我々は最も安全的な支払手段を提供します。 OmgzlookのMicrosoft CertiProf RWVCPC問題集は専門家たちが数年間で過去のデータから分析して作成されて、試験にカバーする範囲は広くて、受験生の皆様のお金と時間を節約します。 弊社のSAP E_S4CPE_2405真題を入手して、試験に合格する可能性が大きくなります。
Updated: May 28, 2022