初心者にとって、AZ-220勉強ガイド試験に合格するのはそんなに難しいことですか？実は、我々OmgzlookのAZ-220勉強ガイド問題集を選んで利用し、お客様は力の限りまで勉強して、合格しやすいです。万が一パースしない場合には、弊社は全額返金を承諾いたします。返金を願うのに対して、お客様はAZ-220勉強ガイドに合格しない成績書を弊社に送付して、弊社は確認の後、支払い金額を全部返済します。 OmgzlookのMicrosoftのAZ-220勉強ガイド試験問題資料は質が良くて値段が安い製品です。我々は低い価格と高品質の模擬問題で受験生の皆様に捧げています。 IT職員の一員として、目前のMicrosoftのAZ-220勉強ガイド試験情報を明らかに了解できますか？もし了解しなかったら、心配する必要がありません。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 夢を持ったら実現するために頑張ってください。
短時間で一度に本当の認定試験に高いポイントを取得したいなら、我々OmgzlookのMicrosoft AZ-220 - Microsoft Azure IoT Developer勉強ガイド日本語対策問題集は絶対にあなたへの最善なオプションです。 きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。
そうすれば、わかりやすく、覚えやすいです。弊社の AZ-220勉強ガイド参考資料は実践に基づいて、専門的な知識の蓄積です。だから、AZ-220勉強ガイド試験のために、弊社の商品を選ばれば、後悔することがないです。
Microsoft AZ-220勉強ガイド - Omgzlookを選られば、成功しましょう。
OmgzlookのMicrosoftのAZ-220勉強ガイド試験トレーニング資料は豊富な経験を持っているIT専門家が研究したものです。君がMicrosoftのAZ-220勉強ガイド問題集を購入したら、私たちは一年間で無料更新サービスを提供することができます。もしMicrosoftのAZ-220勉強ガイド問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。
君はまずネットで無料な部分のMicrosoft認証試験をダウンロードして現場の試験の雰囲気を感じて試験に上手になりますよ。MicrosoftのAZ-220勉強ガイド認証試験に失敗したら弊社は全額で返金するのを保証いたします。
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 2
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 3
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 4
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 5
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
弊社のOmgzlookはIT認定試験のソフトの一番信頼たるバンドになるという目標を達成するために、弊社はあなたに最新版のMicrosoftのSAP C-ARSUM-2404試験問題集を提供いたします。 EMC D-PDD-DY-23 - 合格書を持ち方が持たない人により高い給料をもうけられます。 我々のMicrosoftのEMC D-DS-OP-23ソフトを利用してお客様の高通過率及び我々の技術の高いチームで、我々は自信を持って我々Omgzlookは専門的なのだと言えます。 Cisco 200-301J - 模擬テスト問題集と真実の試験問題がよく似ています。 あなたは各バーションのMicrosoftのVMware 3V0-32.23試験の資料をダウンロードしてみることができ、あなたに一番ふさわしいバーションを見つけることができます。
Updated: May 28, 2022