あなたはキャリアで良い昇進のチャンスを持ちたいのなら、OmgzlookのMicrosoftのAZ-220テスト資料「Microsoft Azure IoT Developer」試験トレーニング資料を利用してMicrosoftの認証の証明書を取ることは良い方法です。現在、MicrosoftのAZ-220テスト資料認定試験に受かりたいIT専門人員がたくさんいます。Omgzlookの試験トレーニング資料はMicrosoftのAZ-220テスト資料認定試験の１００パーセントの合格率を保証します。 MicrosoftのAZ-220テスト資料認証試験のために少ないお金でよい成果を取られるのOmgzlookのは最良の選択でございます。Omgzlookは例年試験内容を提供したあなたに後悔しないように価値があるサイトだけではなく、無料の一年更新サービスも提供するに最も賢明な選択でございます。 OmgzlookのMicrosoftのAZ-220テスト資料試験トレーニング資料を持っていたら、試験に対する充分の準備がありますから、安心に利用したください。
Microsoft Certified: Azure IoT Developer Specialty AZ-220 無料な部分ダウンロードしてください。
一回だけでMicrosoftのAZ-220 - Microsoft Azure IoT Developerテスト資料試験に合格したい？Omgzlookは君の欲求を満たすために存在するのです。 当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。MicrosoftのAZ-220 無料過去問認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。
OmgzlookのMicrosoftのAZ-220テスト資料試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。その権威性は言うまでもありません。うちのMicrosoftのAZ-220テスト資料試験トレーニング資料を購入する前に、Omgzlookのサイトで、一部分のフリーな試験問題と解答をダンロードでき、試用してみます。
Microsoft AZ-220テスト資料 - そのような人になりたいのですか。
自分のIT業界での発展を希望したら、MicrosoftのAZ-220テスト資料試験に合格する必要があります。MicrosoftのAZ-220テスト資料試験はいくつ難しくても文句を言わないで、我々Omgzlookの提供する資料を通して、あなたはMicrosoftのAZ-220テスト資料試験に合格することができます。MicrosoftのAZ-220テスト資料試験を準備しているあなたに試験に合格させるために、我々Omgzlookは模擬試験ソフトを更新し続けています。
Omgzlookがそばのいてあげたら、全ての難問が解決できます。Omgzlookに助けられた受験生は数え切れないです。
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
あなたは自分の望ましいMicrosoft Microsoft AZ-305-KR問題集を選らんで、学びから更なる成長を求められます。 OmgzlookのMicrosoftのMicrosoft DP-203-KR試験トレーニング資料を手に入れたら、試験に合格することができるようになります。 現在IT技術会社に通勤しているあなたは、MicrosoftのNetwork Appliance NS0-604試験認定を取得しましたか？Network Appliance NS0-604試験認定は給料の増加とジョブのプロモーションに役立ちます。 Adobe AD0-E126 - IT認定試験の認証資格は国際社会で広く認可されています。 だから、我々社は力の限りで弊社のMicrosoft SAP C-LCNC-2406試験資料を改善し、改革の変更に応じて更新します。
Updated: May 28, 2022