確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。 Omgzlookの専門家チームがMicrosoftのAZ-104対応資料認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。MicrosoftのAZ-104対応資料「Microsoft Azure Administrator」認証試験に参加者に対して30時間ぐらいの短期の育成訓練でらくらくに勉強しているうちに多くの知識を身につけられます。 MicrosoftのAZ-104対応資料認定試験を受けてAZ-104対応資料認証資格を取得したいですか。
Microsoft Azure Administrator Associate AZ-104 まだ何を待っているのでしょうか？
OmgzlookのMicrosoftのAZ-104 - Microsoft Azure Administrator対応資料トレーニング資料即ち問題と解答をダウンロードする限り、気楽に試験に受かることができるようになります。 激変なネット情報時代で、質の良いMicrosoftのAZ-104 一発合格問題集を見つけるために、あなたは悩むことがありませんか。私たちは君がOmgzlookを選ぶことと正確性の高いMicrosoftのAZ-104 一発合格問題集を祝っています。
OmgzlookのMicrosoftのAZ-104対応資料試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。Omgzlookはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。
Microsoft AZ-104対応資料 - まだ何を待っていますか。
我が社のOmgzlookはいつまでもお客様の需要を重点に置いて、他のサイトに比べより完備のMicrosoft試験資料を提供し、Microsoft試験に参加する人々の通過率を保障できます。お客様に高質のAZ-104対応資料練習問題を入手させるには、我々は常に真題の質を改善し足り、最新の試験に応じて真題をアープデートしたいしています。我々AZ-104対応資料試験真題を暗記すれば、あなたはこの試験にパースすることができます。
OmgzlookのMicrosoftのAZ-104対応資料試験トレーニング資料はMicrosoftのAZ-104対応資料認定試験を準備するのリーダーです。Omgzlookの MicrosoftのAZ-104対応資料試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。
AZ-104 PDF DEMO:
QUESTION NO: 1
You have an azure subscription that contain a virtual named VNet1. VNet1. contains four subnets named Gatesway, perimeter, NVA, and production.
The NVA contain two network virtual appliance (NVAs) that will network traffic inspection between the perimeter subnet and the production subnet.
You need to implement an Azure load balancer for the NVAs. The solution must meet the following requirements:
* The NVAs must run in an active-active configuration that uses automatic failover.
* The NVA must load balance traffic to two services on the Production subnet. The services have different IP addresses Which three actions should you perform? Each correct answer presents parts of the solution.
NOTE: Each correct selection is worth one point.
A. Add two load balancing rules that have HA Ports and Floating IP enabled.
B. Add two load balancing rules that have HA Ports enabled and Floating IP disabled.
C. Add a frontend IP configuration, two backend pools, and a health prob.
D. Add a frontend IP configuration, a backend pool, and a health probe.
E. Deploy a basic load balancer.
F. Deploy a standard load balancer.
Answer: A,C,F
Explanation:
A standard load balancer is required for the HA ports.
-Two backend pools are needed as there are two services with different IP addresses.
-Floating IP rule is used where backend ports are reused.
Incorrect Answers:
F: HA Ports are not available for the basic load balancer.
References:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-overview
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-multivip-overview
QUESTION NO: 2
You need to prepare the environment to meet the authentication requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE Each correct selection is worth one point.
A. a Recovery Services vault and a backup policy
B. an Azure Key Vault and an access policy
C. Azure Active Directory (AD) Identity Protection and an Azure policy
D. an Azure Storage account and an access policy
Answer: A,D
Explanation:
D: Seamless SSO works with any method of cloud authentication - Password Hash Synchronization or
Pass-through Authentication, and can be enabled via Azure AD Connect.
B: You can gradually roll out Seamless SSO to your users. You start by adding the following Azure AD
URL to all or selected users' Intranet zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com Incorrect Answers:
A: Seamless SSO needs the user's device to be domain-joined, but doesn't need for the device to be
Azure AD Joined.
C: Azure AD connect does not port 8080. It uses port 443.
E: Seamless SSO is not applicable to Active Directory Federation Services (ADFS).
Scenario: Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure
AD Seamless SSO) when accessing resources in Azure.
Planned Azure AD Infrastructure include: The on-premises Active Directory domain will be synchronized to Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory- aadconnect-sso-quick-start
QUESTION NO: 3
You have an Azure subscription that contains a user account named User1.
You need to ensure that User1 can assign a policy to the tenant root management group.
What should you do?
A. Assign the Owner role to User1, and then modify the default conditional access policies.
B. Assign the Owner role to User1, and then instruct User1 to configure access management for
Azure resources.
C. Assign the Global administrator role to User1, and then instruct User1 to configure access management for Azure resources.
D. Assign the Global administrator role to User1, and then modify the default conditional access policies.
Answer: B
QUESTION NO: 4
You have an Azure subscription that contains an Azure Availability Set named WEBPROD-AS-
USE2 as shown in the following exhibit.
You add 14 virtual machines to WEBPROD-AS-USE2.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
QUESTION NO: 5
You need to use Azure Automation State Configuration to manage the ongoing consistency of virtual machine configurations.
Which five actions should you perform in sequence? To answer, move the appropriate action from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Step 1: Upload a configuration to Azure Automation State Configuration.
Import the configuration into the Automation account.
Step 2: Compile a configuration into a node configuration.
A DSC configuration defining that state must be compiled into one or more node configurations (MOF document), and placed on the Automation DSC Pull Server.
Step 3: Onboard the virtual machines to Azure Automation State Configuration.
Onboard the Azure VM for management with Azure Automation State Configuration Step 4: Assign the node configuration Step 5: Check the compliance status of the node Each time Azure Automation
State Configuration performs a consistency check on a managed node, the node sends a status report back to the pull server. You can view these reports on the page for that node.
On the blade for an individual report, you can see the following status information for the corresponding consistency check:
The report status - whether the node is "Compliant", the configuration "Failed", or the node is "Not
Compliant" References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started
現在IT技術会社に通勤しているあなたは、MicrosoftのMicrosoft AZ-305試験認定を取得しましたか？Microsoft AZ-305試験認定は給料の増加とジョブのプロモーションに役立ちます。 無料デモはあなたに安心で購入して、購入した後1年間の無料MicrosoftのPegasystems PEGACPBA88V1試験の更新はあなたに安心で試験を準備することができます、あなたは確実に購入を休ませることができます私たちのソフトウェアを試してみてください。 あなたの資料を探す時間を節約し、Microsoft IBM C1000-184試験の復習をやっています。 CompTIA SY0-701-JPN - 我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。 まだどうのようにMicrosoft Huawei H19-338_V3.0資格認定試験にパースすると煩悩していますか。
Updated: May 28, 2022